Epson EH-TW8100 V11H524070LW User Manual
Product codes
V11H524070LW
Configuration Menu
71
Function
Menu/Settings
Explanation
Progressive
*2
Off, Video, Film/Auto
*5
*6
(This can only be set when receiving signal input
from the Video port or when receiving 480i, 576i,
or 1080i signal input from the Component,
HDMI1, or HDMI2 ports or from WirelessHD.)
Converts the signal from interlaced (i) to pro-
gressive (p) using a method appropriate for the
image signal.
from the Video port or when receiving 480i, 576i,
or 1080i signal input from the Component,
HDMI1, or HDMI2 ports or from WirelessHD.)
Converts the signal from interlaced (i) to pro-
gressive (p) using a method appropriate for the
image signal.
•
Off: No signal conversion is performed.
•
Video: This is ideal for viewing general video
images.
images.
•
Film/Auto: Performs the optimal conversion for
film, CG, or animation input signals.
film, CG, or animation input signals.
Motion Detec-
tion
tion
*2
*5
1 - 5
Sets the image motion speed from 1 (slow, for
still images) to 5 (fast, for movies). Change this
setting if you are experiencing poor still image
quality or flickering movies.
still images) to 5 (fast, for movies). Change this
setting if you are experiencing poor still image
quality or flickering movies.
Auto Setup
*3
On, Off
Sets whether or not to automatically adjust the
image whenever the input signal is changed.
When enabled, the tracking, display position,
and synchronization are automatically config-
ured.
image whenever the input signal is changed.
When enabled, the tracking, display position,
and synchronization are automatically config-
ured.
Frame Interpo-
lation
lation
Off, Low, Normal, High
Reduces afterimages when projecting moving
images by interpolating between one frame and
the next.
images by interpolating between one frame and
the next.
s
Super-resolu-
tion
tion
0 - 5
Reduces blurring that occurs at the edge of im-
ages when the resolution is increased.
ages when the resolution is increased.
s
Advanced
Noise Reduc-
tion
tion
*2
*5
Off, 1, 2, 3
Smoothes out rough images. There are three
modes available. Select your favorite setting.
It is recommended that this is set to Off when
viewing image sources in which noise is very low,
such as for DVDs.
modes available. Select your favorite setting.
It is recommended that this is set to Off when
viewing image sources in which noise is very low,
such as for DVDs.
Setup Level
*2
*5
0%, 7.5%
(This can be set when receiving an NTSC or com-
ponent video signal from the Video port.)
Change this setting when using devices with a
different black level (Setup Level) such as prod-
ucts designed for the Korean market. Check the
specifications for your connected device before
changing this setting.
ponent video signal from the Video port.)
Change this setting when using devices with a
different black level (Setup Level) such as prod-
ucts designed for the Korean market. Check the
specifications for your connected device before
changing this setting.