Epson EH-TW8100 V11H524070LW User Manual
Product codes
V11H524070LW
Configuration Menu
76
Function
Menu/Settings
Explanation
Display
Menu Position
-
Sets the position where the menu should be dis-
played.
played.
Menu Color
Color 1, Color 2
Selects the color for the top menu.
•
Color 1: Black
•
Color 2: Blue
Messages
On, Off
Sets whether or not to display the following mes-
sages (On or Off).
sages (On or Off).
•
Item names for image signals, color modes, as-
pect ratios, and loading memory.
pect ratios, and loading memory.
•
If the internal temperature is rising when no im-
age signal is being input or an unsupported sig-
nal is detected.
age signal is being input or an unsupported sig-
nal is detected.
Display Background Black, Blue, Logo
Selects the screen status when no image signal
is being input.
is being input.
Startup Screen
On, Off
Sets whether or not to show a startup screen
when projection begins (On or Off). If changed,
this setting is enabled after you power off the
projector and the cool-down process is com-
plete.
when projection begins (On or Off). If changed,
this setting is enabled after you power off the
projector and the cool-down process is com-
plete.
Standby Confirma-
tion
tion
On, Off
Sets whether or not to display a standby confir-
mation message (On or Off).
mation message (On or Off).
s
Input Signal
Video Signal
Auto, NTSC,
NTSC4.43, PAL, M-
PAL, N-PAL, PAL60,
SECAM
NTSC4.43, PAL, M-
PAL, N-PAL, PAL60,
SECAM
Sets the signal type depending on the video de-
vice connected to the Video port. When set to
Auto, the video signal is set automatically.
If you notice noise in the image even when set to
Auto, or if you are not seeing any image at all,
select the correct signal type from the available
options.
vice connected to the Video port. When set to
Auto, the video signal is set automatically.
If you notice noise in the image even when set to
Auto, or if you are not seeing any image at all,
select the correct signal type from the available
options.
Component
Auto, YCbCr, YPbPr
Sets the output signal for the video device con-
nected to the Component port.
When set to Auto, the output signal is set auto-
matically. If you notice unnatural colors when set
to Auto, set the appropriate output signal from
the available options.
nected to the Component port.
When set to Auto, the output signal is set auto-
matically. If you notice unnatural colors when set
to Auto, set the appropriate output signal from
the available options.
Language
-
Selects the display language.
Reset
Yes, No
Resets all adjustment values for Extended to
their default settings.
their default settings.
*1
Only EH-TW8100W/EH-TW8100 is displayed.
*2
Only EH-TW9100W/EH-TW9100 is displayed.
Memory menu
Function
Explanation
Load Memory
Loads settings saved using the Save Memory function.
s
This cannot be selected if you have not saved any settings with the Save Mem-
ory function.
ory function.
Save Memory
Saves certain Image and Signal settings to memory.
s