Philips 5.1 Home theater HTS3051BV HTS3051BV/F7 User Manual
Product codes
HTS3051BV/F7
40
LIST OF SETTINGS
EN
Category
Menus / Options
Description
Ad
va
n
ced
Se
tup
Video
Output
Output
HDMI Video
HDMI 1080p/24
• This feature is available
only when the display
device is connected by
an HDMI cable.
device is connected by
an HDMI cable.
• Refer to page 45 for
more information.
Auto
“Auto”:
Outputs the picture in 1080p/24
(1080 progressive with 24 frames per
second) when it meets all the
conditions listed below:
• The video resolution and the frame
Outputs the picture in 1080p/24
(1080 progressive with 24 frames per
second) when it meets all the
conditions listed below:
• The video resolution and the frame
rate of the material is 1080p/24 .
• “HDMI Video Resolution” setting is
set to “1080p”.
• The display device supports the
1080p/24 output.
“Off”:
• Outputs the picture in 1080p/60.
• Outputs the picture in 1080p/60.
(60 frames per second, progressive)
Off
HDMI Video Resolution*
• This feature is available
• This feature is available
only when the display
device is connected by
an HDMI cable.
device is connected by
an HDMI cable.
• Refer to page 45 for
more information.
Auto
Sets the resolution of the video signal
being output from the HDMI OUT jack.
• The selected resolution must also be
being output from the HDMI OUT jack.
• The selected resolution must also be
supported by your TV monitor.
480p
720p
1080i
1080p
720p
1080i
1080p
HDMI Deep Color
• This feature is available
• This feature is available
only when the display
device is connected by
an HDMI cable, and
when it supports Deep
Color feature.
device is connected by
an HDMI cable, and
when it supports Deep
Color feature.
Auto
Reduces the posterization effect of
the playback picture.
“Auto”:
Reduces the posterization effect by
automatically outputting up to 36 bit
color whenever the unit recognizes
the connected display device
supports Deep Color feature.
“Off”:
Outputs the standard 24 bit color.
the playback picture.
“Auto”:
Reduces the posterization effect by
automatically outputting up to 36 bit
color whenever the unit recognizes
the connected display device
supports Deep Color feature.
“Off”:
Outputs the standard 24 bit color.
Off
Component Output
480i
Sets resolution for component output
picture.
• The selected resolution must also be
picture.
• The selected resolution must also be
supported by your TV monitor.
• Refer also to your TV’s manual.
• If you have selected the resolution
• If you have selected the resolution
not supported by your TV by mistake
and the picture gets disturbed, press
and hold [B (play)] on the front
panel for 5 seconds to change the
setting back to its default.
and the picture gets disturbed, press
and hold [B (play)] on the front
panel for 5 seconds to change the
setting back to its default.
• When HDMI cable is connected, only
“480i” and the resolution selected in
the “HDMI Video Resolution” will be
available.
the “HDMI Video Resolution” will be
available.
480p
720p
1080i
720p
1080i
With regard to DVD-video
with copy protection, the
resolution will be set to
480p regardless of the
setting here.
If 480p output is not
available, 480i will be
output.
with copy protection, the
resolution will be set to
480p regardless of the
setting here.
If 480p output is not
available, 480i will be
output.
De-interlacing Mode
Auto
“Auto”:
Automatically detects film or video
content, and appropriately converts it.
“Video”:
Select this option when the picture is
distorted when using “Auto”.
Automatically detects film or video
content, and appropriately converts it.
“Video”:
Select this option when the picture is
distorted when using “Auto”.
Video
Black Level
On
Adjusts brightness to compensate for
ambient room light.
ambient room light.
Off
HD Noise Reduction
On
Reduces noise of the playback picture.
“On”:
Activates Noise Reduction.
“Off”:
Deactivates Noise Reduction.
“On”:
Activates Noise Reduction.
“Off”:
Deactivates Noise Reduction.
Off
E1S07UD_E1S08UD_EN.book Page 40 Monday, January 31, 2011 2:42 PM