Philips 5.1 Home theater HTS3051BV HTS3051BV/F7 User Manual

EN

Audio

Night Mode

Auto

Compresses range between soft 
and loud sounds.
“Auto”:
Night Mode will be activated 
automatically when Dolby TrueHD 
audio is played back.
“On”:
Activates the Night Mode.
“Off”:
Deactivates the Night Mode.

On
Off

Blu-ray Disc Audio

Mix Audio Output

“Mix Audio Output”:
The audio for the secondary video 
and the interactive application will 
be output together with the audio 
for the primary video.
“Primary Audio Only”:
Only audio for the primary video 
will be output.
When playing back a BD-video which 
only contains primary audio, the 
audio output will be the same case 
as “Primary Audio Only” even if the 
“Blu-ray Disc Audio” is set to “Mix 
Audio Output”.

Primary Audio Only

Audio Output*
• Refer to page 46 for 

more information.

Speakers

“Speakers”
Audio will be output from the 
5.1ch speakers.
“HDMI Normal”
The Multi-channel audio signals 
are output from HDMI OUT jack 
with Bitstream or LPCM depending 
on the material.
“HDMI LPCM”
The Multi-channel or stereo audio 
signals are output from HDMI OUT 
jack with LPCM.

HDMI Normal
HDMI LPCM

Speaker Setup
• This  feature  is 

available only when 
“Audio Output” is set 
to “Speakers”. 
(Refer to page 46.)

Surround Effects
• Sets the surround 

effect of audio when 
the setting of 
surround mode is set 
to “Dolby Pro Logic II 
Movie” or “Dolby Pro 
Logic II Music”.
(Refer to “Selecting 
Surround Mode” on 
page 54.)

Center 
Width

0 ~ 7

default is 3 Adjust the sound balance between 

center and front speakers.

Dimension -3 ~ 3

default is 0 Adjust the sound balance between 

front and rear speakers.

Panorama

On

“On” : 
Sets the sound of center speaker to 
have surround-sound effect.
“Off” : 
Sets the sound of center speaker to 
normal.

Off

Speaker Distance

Unit

Feet

Sets the unit of measure for 
“Speaker Distance”.

Meters

Front (L/R)

Feet : 

0 ~ 15

Meters :

0 ~ 4.5

default is 3 Sets the distance from the listening 

point to each speaker to get the 
ideal delay time.
• If you change the setting of 

“Front (L/R)”, the setting of 
“Center” and “Surround” will be 
set to the same setting 
automatically.

• If you set “Front (L/R)” to 0 ft (0m),  

you can only select 0 ft (0m) for 
“Center” and “Surround”.

• Difference of the values among 

“Front (L/R)” and “Center” cannot 
exceed 5 ft (1.5m).

Center

default is 3

Surround

default is 3

Default

Yes 

Sets all speaker distance settings to 
the default setting.

No

E1S07UD_E1S08UD_EN.book  Page 41  Monday, January 31, 2011  2:42 PM