Moxa PTC-101-M-LC-LV User Manual
1
w w w. m o x a . c o m
i n f o @ m o x a . c o m
Ethernet Media Converters
Introduction
The PTC-101 Ethernet-to-fiber media converters convert from
10/100BaseT(X) to 100BaseFX. Models are available with either SC,
ST, or LC connectors. The PTC-101 converters eliminate the need for
additional wiring, and support IEEE 802.3 and IEEE 802.3u/x protocols
10/100BaseT(X) to 100BaseFX. Models are available with either SC,
ST, or LC connectors. The PTC-101 converters eliminate the need for
additional wiring, and support IEEE 802.3 and IEEE 802.3u/x protocols
Specifications
with 10/100M, full/half-duplex, and MDI/MDI-X auto-sensing to
provide a total solution for your industrial Ethernet networks. The PTC-
101 is compliant with the essential sections of EN 50155, covering
operating temperature, power input voltage, surge, ESD and vibration.
provide a total solution for your industrial Ethernet networks. The PTC-
101 is compliant with the essential sections of EN 50155, covering
operating temperature, power input voltage, surge, ESD and vibration.
IEC 61850-3 and EN 50155 Ethernet-to-fiber media converters
PTC-101 Series
›
10/100BaseT(X) auto-negotiation and auto-MDI/MDI-X
›
Link Fault Pass-Through (LFP)
›
Power failure alarm by relay output (LV model only)
›
-40 to 85°C operating temperature range
›
Redundant dual DC power inputs (LV model only)
›
Integrated high-reliability power supply eliminates the need for
external power transformer
›
Compliant with EN 50121-4 and essential sections of EN 50155
Technology
Standards:
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X), 100BaseFX
IEEE 802.3 for 10BaseT
IEEE 802.3u for 100BaseT(X), 100BaseFX
Interface
RJ45 Ports: 10/100BaseT(X)
Fiber Ports: 100BaseFX (SC/ST/LC connectors)
LED Indicators: PWR1, PWR2, Fiber Link, 10/100M (TP port)
DIP Switches:
Fiber Ports: 100BaseFX (SC/ST/LC connectors)
LED Indicators: PWR1, PWR2, Fiber Link, 10/100M (TP port)
DIP Switches:
DIP No.
Function
ON
OFF
1
Auto Negotiation
Enable
Disable
2
Force TP Speed
100 Mbps
10 Mbps
3
Force TP Duplex
Full Duplex
Half Duplex
4
Link Fault Pass Throuth
Enable
Disable
5
Operating Mode
Store-and-Forward
Pass Through
The default setting for all DIP switches is ON.
Alarm Contact: One relay output with current carrying capacity of 1 A
@ 24 VDC (LV model only)
@ 24 VDC (LV model only)
Optical Fiber
100BaseFX
Multi-mode
Single-mode
Wavelength
1300 nm
1310 nm
Max. TX
-14 dBm
0 dBm
Min. TX
-20 dBm
-5 dBm
RX Sensitivity
-32 dBm
-34 dBm
Link Budget
12 dB
29 dB
Typical Distance
5 km a
4 km b
40 km c
Saturation
-6 dBm
-3 dBm
a. 50/125 μm, 800 MHz*km fiber optic cable
b. 62.5/125 μm, 500 MHz*km fiber optic cable
c. 9/125 μm, 3.5 PS/(nm*km) fiber optic cable
Physical Characteristics
Housing: Metal, IP30 protection
Dimensions: 152.15 x 123.46 x 66.65 mm (5.99 x 4.86 x 2.62 in)
Weight:
Product only: 690 g
Packaged: 875 g
Dimensions: 152.15 x 123.46 x 66.65 mm (5.99 x 4.86 x 2.62 in)
Weight:
Product only: 690 g
Packaged: 875 g
Environmental Limits
Operating Temperature: -40 to 85°C (-40 to 185°F)
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Conformal Coating: Available upon request
Storage Temperature: -40 to 85°C (-40 to 185°F)
Ambient Relative Humidity: 5 to 95% (non-condensing)
Conformal Coating: Available upon request