Intermec 073294-001 User Manual
Chapter 2 — Replacing Parts
You also need one or more of the following parts depending on what you
need to replace:
need to replace:
• Tethered scan flex assembly (P/N 072786-004)
• Tethered scanner door (P/N 073366-001)
• Tethered scanner cover (P/N 073179-001)
• Phillips 2-56 x 3/16 steel screw (P/N 591884-001)
• Phillips 2-28 x .250 thread-form screw (P/N 525301)
To replace the tethered scanner
1
Open the CK30. For help, see “Opening the CK30” on page 9.
2
From the bottom cover, remove the four Phillips screws that attach
the tethered scan flex assembly.
the tethered scan flex assembly.
3
Work the tethered scanner connector loose from the scan window
and lift the tethered scan flex assembly away from the bottom cover.
and lift the tethered scan flex assembly away from the bottom cover.
Tethered
scan flex
assembly
scan flex
assembly
Screw
(4 places)
(4 places)
4
Remove the two Phillips screws that attach the tethered scan flex
assembly to the mounting bracket.
assembly to the mounting bracket.
5
If you need to replace the tethered scanner door:
a
Use a straight-slot screwdriver to pry loose one of the lower tabs from
the bottom door and push it out of the opening in the bottom cover.
the bottom door and push it out of the opening in the bottom cover.
26
CK30 Handheld Computer Service Manual