HP 701977-FL1 User Manual
5.
Remove the service access cover (see Service access cover).
6.
Remove the optical drive (see
).
7.
Remove the keyboard (see
8.
Remove the top cover (see
)
9.
Remove the display assembly (see
).
Remove the fan/graphics board heat sink assembly:
NOTE:
Before proceeding, make sure you disconnect the power button board cable and the RJ-45
cable.
1.
Following the sequence stamped into the graphics board heat sink, loosen the 4 Phillips captive
screws (1) that secure the graphics board heat sink/fan assembly to the system board.
screws (1) that secure the graphics board heat sink/fan assembly to the system board.
76
Chapter 4 Removal and replacement procedures