Alcatel-Lucent OS9-GNI-U24 User Manual
Alcatel-Lucent
Page 11
OmniSwitch 9000
OmniSwitch 9700 Chassis Technical Specifications
OmniSwitch 9700
The OmniSwitch 9700 is a 10-slot large enterprise core
switch. The OmniSwitch 9700 offers up to 192 Gigabit
Ethernet ports and can also be equipped with up to
16/48 (Fully-populated 8 x OS9-XNI-U2/OS9-XNI-U6
modules, with each XNI containing two or six XFPs)
10-Gigabit Ethernet ports.
The OmniSwitch 9700 chassis contains the following
major components:
• Eight Network Interface (NI) module slots
• Two Chassis Management Module (CMM) slots
• Power supply bay holding up to three power supplies
• Fan tray with three fans
switch. The OmniSwitch 9700 offers up to 192 Gigabit
Ethernet ports and can also be equipped with up to
16/48 (Fully-populated 8 x OS9-XNI-U2/OS9-XNI-U6
modules, with each XNI containing two or six XFPs)
10-Gigabit Ethernet ports.
The OmniSwitch 9700 chassis contains the following
major components:
• Eight Network Interface (NI) module slots
• Two Chassis Management Module (CMM) slots
• Power supply bay holding up to three power supplies
• Fan tray with three fans
Total slots per chassis
10
Total slots for network interface (NI) modules
8
Total slots for Chassis Management Module (CMM)
2
Total bays for power supplies
3
Total 10/100/1000BASE-T copper 10/100/1000Mbps Ethernet ports available
192 (Fully-populated with 8 x OS9-GNI-C24 modules)
No other NI module types installed.
No other NI module types installed.
Total 10/100/1000BASE-T copper 10/100/1000Mbps Ethernet ports with PoE available
192 (Fully-populated with 8 x OS9-GNI-P24 modules)
No other NI module types installed.
No other NI module types installed.
Total 1000BASE-X fiber Gigabit Ethernet ports available
192 (Fully-populated with 8 x OS9-GNI-U24 modules)
No other NI module types installed.
No other NI module types installed.
Total 10GBASE-X 10-Gigabit Ethernet ports available
Wire-rate: 16 (Fully-populated with 8 OS9-XNI-U2
modules, with each XNI containing two XFPs.)
Oversubscribed: 48 (Fully-populated with 8 OS9-XNI-U6
modules, with each XNI containing six XFPs.)
The oversubscription ratio is: 2.5:1
modules, with each XNI containing two XFPs.)
Oversubscribed: 48 (Fully-populated with 8 OS9-XNI-U6
modules, with each XNI containing six XFPs.)
The oversubscription ratio is: 2.5:1
Power Consumption
OS9700-Chassis & Fans = 80W
Full Duplex support
Full duplex is supported on Gigabit Ethernet ports and
10-Gigabit Ethernet ports.
10-Gigabit Ethernet ports.
Environmental Requirements
OmniSwitch 9000 Series switches have the following
environmental and airflow requirements:
• The installation site must maintain a temperature between
0° and 45° Celsius (32° and 113° Fahrenheit) and not
exceed 95 percent maximum humidity (non-condensing) at
any time.
• Be sure to allow adequate room for proper air ventilation
at the front, back, and sides of the switch. No clearance is
necessary at the top or bottom of the chassis.
environmental and airflow requirements:
• The installation site must maintain a temperature between
0° and 45° Celsius (32° and 113° Fahrenheit) and not
exceed 95 percent maximum humidity (non-condensing) at
any time.
• Be sure to allow adequate room for proper air ventilation
at the front, back, and sides of the switch. No clearance is
necessary at the top or bottom of the chassis.
Electrical Requirements
OmniSwitch 9000 Series switches have the following
general electrical requirements:
• Each switch requires one grounded electrical outlet for
each power supply installed in the chassis (up to three for
OS9700 switches; up to two for OS9600 switches).
OmniSwitch 9000 Series switches offer both AC and DC
power supply support. For switches using AC power
connections, each supplied AC power cord is 2 meters
(approximately 6.5 feet) long. Do not use extension cords.
Redundant AC Power. It is recommended that each AC
outlet reside on a separate circuit. With redundant AC, if a
single circuit fails, the switch’s remaining power supplies
(on separate circuits) are likely to remain unaffected and
can, therefore, continue operating.
general electrical requirements:
• Each switch requires one grounded electrical outlet for
each power supply installed in the chassis (up to three for
OS9700 switches; up to two for OS9600 switches).
OmniSwitch 9000 Series switches offer both AC and DC
power supply support. For switches using AC power
connections, each supplied AC power cord is 2 meters
(approximately 6.5 feet) long. Do not use extension cords.
Redundant AC Power. It is recommended that each AC
outlet reside on a separate circuit. With redundant AC, if a
single circuit fails, the switch’s remaining power supplies
(on separate circuits) are likely to remain unaffected and
can, therefore, continue operating.
OmniSwitch 9700 Chassis Dimensions
Overall Width (including rack-mount flanges)
19 1/8 inches
Chassis Width (rack-mount flanges not included)
17 9/16 inches
Height
19 1/4 inches
Height (rack units)
11 RU
Overall Depth (including required fan tray)
17 5/16 inches
Chassis Depth (fan tray not included)
14 3/4 inches