Enterasys SecureStack B2G124-24 B2G124-24 User Manual

Product codes
B2G124-24
Page of 9
C2RPS-PSM
This 150-watt DC power supply can be used as redundant power for any 
of the SecureStack C2 or B2 non–Power-over-Ethernet switches (B2G124-
24, B2G124-48, and B2H124-48). The 150-watt power supply can be 
mounted in a SecureStack RPS chassis (C2RPS-SYS, C2RPS-CHAS8, or 
C2RPS-CHAS2). A single RPS can power a switch that loses AC power.
C2RPS-SYS
This SecureStack RPS bundle includes a chassis (C2RPS-CHAS8) that 
supports up to eight individual 150-watt redundant power supplies 
(C2RPS-PSM). The bundle includes the basic chassis, which can be rack 
mounted, and one 150-watt redundant power supply.
C2RPS-POe
This 500-watt DC power unit can be used as redundant power for any of 
the SecureStack C2 or B2 Power-over-Ethernet switches (B2G124-48P 
or B2H124-48P). Since the B2 PoE switches provide up to 360 watts of 
PoE power, a much larger redundant power supply is required. This RPS 
is a rack-mountable unit and does not require an additional chassis.
C2RPS-CHAS8
This SecureStack RPS power chassis supports up to eight individual 150-
watt redundant power supplies (C2RPS-PSM). RPS units are mounted 
vertically in the chassis.
C2RPS-CHAS2
This SecureStack RPS power chassis supports up to two individual 150-
watt redundant power supplies (C2RPS-PSM). RPS units are mounted 
horizontally in the chassis.
Stacking Notes
•  Stacking cables must be ordered to stack the SecureStack B2
•  The SecureStack B2 uses the same stacking cable as the SecureStack
C2 (C2CAB-SHORT or C2CAB-LONG)
•  The SecureStack B2 cannot be stacked with a SecureStack C2 or A2
Specifications Common to all Switch Models
Technical Specifications
Address Table Size
16,000
Throughput Capacity (wire-speed)
13.1 Mpps 
on B2Hxxx models 
35.7 Mpps    on B2Gxxx 24-port models 
71.4 Mpps    on B2Gxxx 48-port models
Aggregate Throughput Capacity
120.0 Gbps     maximum per switch 
960.0 Gbps     maximum per stack
Switching Capacity
17.6 Gbps    on B2Hxxx models 
48.0 Gbps     on B2Gxxx 24-port models 
96.0 Gbps     on B2Gxxx 48-port models
Stacking Capacity
40.0 Gbps       per switch dedicated to stacking 
320.0 Gbps  aggregate dedicated to stacking
VLANs
4,096 VLAN IDs 
1,024 VLAN entries per stack
Priority Queues
8 per port
embedded Services
Multilayer Packet Processing 
Layer 2/3/4 classification 
Ingress Rate Limiting
Switching Services
IEEE 802.1D (MAC Bridges) 
IEEE 802.1w (Rapid Reconvergence) 
IEEE 802.1s (Multiple Spanning Trees) 
IEEE 802.1t (802.1D Maintenance) 
IEEE 802.3ad (Link Aggregation) 
IEEE 802.3x (Flow Control) 
IGMP Snooping v1, 2 
Jumbo Frame support (9,216 bytes)
VLAN Support
IEEE 802.1Q VLAN 
Tagged-based VLAN 
Port-based VLAN 
GVRP 
GARP
Quality of Service
IP DSCP 
IP precedence 
Source IP 
Destination IP 
Source MAC 
Destination MAC