Sanyo EDUCATION PROJECTOR PLC-XE31LMP PLC-XE31LMP User Manual

✔

(See p. 23)

POINT ed

black out 

➜ the captured image ➜ normal ➜ 

• • • • •

Press the NO SHOW button to black out the image.  To
restore to normal, press the NO SHOW button again or
press any other button.  When a projected image is
captured and set as “User” in the Logo selection (p. 43),
the screen changes each time you press the NO SHOW
button as follows.

The message disappears after 4 seconds.

Press the AUTO PC button to operate the Auto PC function.
For more detail, see p. 28.

Press the D.ZOOM buttons to zoom in and zoom out the
images.
For more detail, see p. 34.

Press the P-TIMER button.  The timer display “00 : 00”
appears on the screen and the timer starts to count time
(00 : 00 ~ 59 : 59).  
To stop the P-Timer, press the P-TIMER button.  Press the
P-TIMER button again, then the P-timer display disappears.

P-Timer display

Press the IMAGE button to select an image level of the
screen.
For more detail, see pp. 31, 38.

(See p. 24)

Press the LAMP CONTROL button to select the lamp mode
for changing the brightness of the screen.

Normal ....Normal brightness 
Auto  ........Brightness according with the input signal 
Eco ..........Lower brightness reduces the lamp power

consumption and extends the
lamp life.

For detail, see p. 23.