Sanyo EDUCATION PROJECTOR PLC-XE31LMP PLC-XE31LMP User Manual

The Auto PC Adjustment
function operates to adjust 
the projector. 

The PC System Menu icon 

Selected system is 
displayed.

Systems on this dialog box 
can be selected.

Press the MENU button to display the On-Screen
Menu.  Press the Point

7 8

buttons to move the red

framed pointer to the PC System Menu icon.

Press the Point 

ed

buttons to move the red arrow

pointer to the system that you want to set, and then
press the SELECT button.  

Custom Mode (1~5) set in the
PC Adjust Menu.  (pp. 28, 30)

PC system can also be selected manually.

This projector automatically tunes to various types of computers based on VGA, SVGA, XGA, SXGA, WXGA, or
UXGA with its Multi-scan system and Auto PC Adjustment.  If Computer is selected as a signal source, this
projector automatically detects the signal format and tunes to project a proper image without any additional
setting.  (Signal formats provided in this projector is shown on p. 63 )

One of the following messages may appear when:

The projector cannot recognize the connected
signal conforming to the provided PC Systems.
"Auto" is displayed on the PC System Menu icon
and the Auto PC Adjustment function works to
display proper images.  If the image is not
projected properly, adjust manually.  (pp. 29, 30)

There is no signal input from computer.  Check
the connection between your computer and the
projector.  (See " Troubleshooting" p. 58)

The preset system is manually adjusted in the
PC Adjust Menu.  The adjusted data can be
stored in Mode 1~5.  (pp. 29, 30)  

PC Systems provided in this projector is
selected.  The projector selects a proper system
provided in the projector and displays it.  

*Mode 1 and SVGA 1 are examples.