Saeco Super-automatic espresso machine HD8964/08 HD8964/08 User Manual

76

RINSING

FILL HALF CARAFE 

WITH WATER. INSERT

IN BREWING POSITION

RINSING

PLACE A CONTAINER

UNDER THE

DISPENSING SPOUT

 Empty the milk carafe and fi ll half of it with fresh water. Insert it back 

into the machine with the dispensing spout open. Press the “

” but-

ton.

 Empty the container and place it back under both the milk carafe dis-

penser and the dispensing spout. Press the “

” button.

 The rinse cycle is activated. 

 Note: 

To empty the container during the process and to pause the rinse cycle, 
press the “

” button. To resume the cycle, press the “

” button. 

 Note: 

The rinse cycle is performed in order to have the circuit cleaned with a 
preset amount of water to ensure proper machine performance. If the 
water tank is not fi lled up to MAX level, the machine could require two or 
more cycles.

 When the amount of water needed for the rinse cycle has been 

completely dispensed, the machine automatically ends the descaling 
process.

 Note: 

Wait until it has fi nished rinsing.

 At the end of the descaling process, the machine performs an auto-

matic rinse cycle. Wait until it fi nishes before removing and emptying 
the container.

 Disassemble and wash the milk carafe as described in the “Weekly 

Cleaning of the Milk Carafe” chapter.

 Empty the drip tray (internal) and place it back.

 Remove the small white fi lter and place back the “INTENZA+” water 

fi lter into the water tank if it was installed.

 Note: 

At the end of the descaling cycle, wash the brew group as described in the 
“Weekly Cleaning of the Brew Group” chapter.

RINSING

PAUSE