Saeco Super-automatic espresso machine HD8964/08 HD8964/08 User Manual
Product codes
HD8964/08
78
ENGLISH
Displayed message
Meaning of the message
HOT WATER
INSERT
WATER SPOUT
Insert the water dispensing spout to start dispensing. Press "ESC" to exit.
CAPPUCCINO
INSERT THE CARAFE
WITH THE SPOUT
OPEN
Before beginning to dispense, insert the milk carafe with the dispensing
spout open.
spout open.
The machine needs to be descaled. Follow the steps described in the
“Descaling” chapter of this manual.
Please note that not descaling your machine will ultimately make it stop
working properly. In this case repair is NOT covered under your warranty.
“Descaling” chapter of this manual.
Please note that not descaling your machine will ultimately make it stop
working properly. In this case repair is NOT covered under your warranty.
The machine needs the “INTENZA+” water fi lter to be replaced.
The red light fl ashes. Press any button to exit the stand-by mode.
RESTART TO SOLVE
Take note of the code (E xx) shown on the display at the bottom.
Turn off the machine. After 30 seconds, turn it on again. Repeat the
procedure 2 or 3 times.
If the machine will not start, contact the Philips SAECO hotline in your
country and quote the code shown on the display. You can fi nd its
contact details in the warranty booklet packed separately or on www.
philips.com/support.
Turn off the machine. After 30 seconds, turn it on again. Repeat the
procedure 2 or 3 times.
If the machine will not start, contact the Philips SAECO hotline in your
country and quote the code shown on the display. You can fi nd its
contact details in the warranty booklet packed separately or on www.
philips.com/support.