Thecus Black Data Storage 4 bays N4100B Leaflet

Thecus N4100 IP Storage Appliance 

 

8 

 

Once the hardware is installed, physically connected to your network, and powered on, you can now 

configure the Thecus N4100 so that it is accessible to your network users. Follow the steps below for initial 

software setup. 

 

1.  Insert the installation CD into your CD-ROM drive (host PC must have connection to the above network). 
 
2.  The Setup Wizard should launch automatically. If not, please browse your CD-ROM drive and double 

click on Setup.exe 

 
 
 
 
 
3.  The Setup Wizard will start and automatically detect all Thecus IP storage devices on your network. If 

none are found, please check your connection and refer to the Troubleshooting Guide at the back of the 
N4100 User’s Manual. 

 
4.  Select the N4100 that you like to configure.