Thecus All-Purpose Storage Server N1200BR Leaflet

Product codes
N1200BR
Page of 83
 
 
 
67 
USB and eSATA Storage Expansion 
The N1200 supports external USB hard disks through its two USB ports. Once a 
USB hard disk has been successfully mounted, users can access the files on the 
USB hard disk under the USBHDD folder. The N1200 supports up to 6 USB 
external storage devices. All file names on the USB disk volume are case sensitive. 
 
Before attaching a USB disk drive to N1200, you have to partition and format it 
on a desktop computer or a notebook first. The attached device will be located at 
\\192.168.1.100\usbhdd\usb1\1\
 where 192.168.1.100 means the IP address 
of N1200, usb1 stands for the first USB device, and 1 stands for the first partition 
on disk #1, the USB disk drive. If it is an NTFS partition, NAS users can open or 
copy files from \\192.168.1.100\usbhdd\usb1\1 but cannot add new files or 
modify existing files.  
 
 
 
 
 
 
 
The N1200 also supports eSATA hard disks with its eSATA port. To connect an 
eSATA hard disk, follow the steps below: 
 
1.  Power off the N1200 by holding down the power button for three seconds. 
The power off sequence will begin, and the N1200 will power off. 
 
2.  Plug the eSATA hard disk to the eSATA port on the N1200. 
 
3.  Power on the N1200 and login under the administrator account to enter 
the Web Administration Interface. 
 
4.  From the Web Administrator Interface, format the eSATA hard disk by 
navigating to Storage > eSATA and clicking the Format button. 
 
5.  Once formatted, the eSATA hard disk will be made available in a folder 
named eSATAHDD. 
 
 
 
Remote Administration 
You can set up your N1200 for remote administration. With remote administration, 
you can access your N1200 over the Internet, even if your N1200 is behind a 
router. This is especially useful if you are traveling and suddenly need a file from 
your N1200.  
 
Setting up remote administration is a three-part process, and will require the 
following equipment: 
 
• 
Thecus N1200 NAS device 
• 
Cable/DSL Router with Dynamic DNS support 
• 
Home PC 
• 
Internet Connection 
NOTE 
If you want to write to an USB storage device, the file system must be FAT32. 
 
USB Storage 
FAT32 Partition 
NTFS Partition 
Read OK 
OK 
Write OK 
 
NOTE 
The N1200 will only recognize eSATA hard disks that have been formatted through 
the Web Administration Interface. It will NOT recognize eSATA devices that were 
formatted on other systems.