Thecus All-Purpose Storage Server N1200BR Leaflet

 

 
 

69 

In the event that the N1200 won’t turn on, check to see that the power cable is 
correctly plugged in to the N1200. Also check to see if the electrical outlet is 

functioning.  

To reset the N1200, first make sure that the unit is powered off. With the unit 
powered off, press and hold the reset button. With the reset button held down, 

power on the system by pressing the power button. You will hear the unit beep 
once when you turn it on, do not release the reset button until you hear the unit 

beep again. After that, the N1200's WAN IP address will be reset to 
192.168.1.100 temporarily. Please note that all file services at this time will be 
stopped. 

 

1.  Point your browser to 192.168.1.100, you will see the following screen: 

 

 

 
 

 
 

 
2.  If you select Reset to Factory Default option, the system will be reset. 

Below are the default system settings: 
Admin password Æ　admin 
WAN IP address Æ 192.168.1.100 
WAN IP Gateway Æ 192.168.1.1 
WAN Jumbo Frame Support Æ Off 
LAN IP Æ 192.168.2.254 
LAN Jumbo Frame Support Æ Off 
HTTP Port Æ 80  
HTTPS port Æ 443 
 

Make sure that your PC is on the same IP segment as your N1200, i.e. 

192.168.1.XXX when you are accessing the N1200 after a reset to factory default.