Digitus WLAN Broadband Router DN-7039-A User Manual
Product codes
DN-7039-A
DN-7039-A
108M Wireless Router User Guide
2.3.2 The Rear Panel
The rear panel contains the following features. (Viewed from left to right:)
Wireless antenna
Factory Default Reset button
There are two ways to reset the router's factory defaults:
1)
Use the
Factory Defaults function on System Tools -> Factory Defaults page in the
router's Web-based Utility.
2)
Use the Factory Default Reset button: First, turn off the router's power. Second, press and
hold the default reset button then turn on the router's power, until the system LED lights up
hold the default reset button then turn on the router's power, until the system LED lights up
(about 3 seconds). Last, release the reset button and wait for the router to reboot.
Note: Ensure the router is powered on before it restarts completely.
WAN RJ45 port for connecting the router to a cable, DSL modem, or Ethernet
Four LAN 10/100Mbps RJ45 ports for connecting the router to the local PCs
AC power socket: only use the power adapter supplied with the DN-7039-A
108Mbps Wireless Router, use of a different adapter may result in product damage.
108Mbps Wireless Router, use of a different adapter may result in product damage.
1
WAN
2
3
4
RESET
Figure 2-2: Rear Panel sketch
-
5 -