Digitus WLAN Broadband Router DN-7039-A User Manual

 

Provides wireless LAN ACL (Access Control List)   

 

Built-in NAT and DHCP server supporting static IP address distributing 

 

Supports Virtual Server, Port Triggering, and DMZ host 

 

Built-in firewall supporting IP address filtering, Domain Name filtering, and MAC 
address filtering 

 

Supports connecting/disconnecting Internet at a specified time of day 

 

Supports access control, allowing parents and network administrators to establish 
restricted access policies based on the time of day for children or staff 

 

Supports TCP/IP, PPPoE, DHCP, ICMP, NAT, SNTP 

 

Supports UPnP, Dynamic DNS, Static Routing, VPN pass-through 

 

Supports Traffic Statistics 

 

Supports ICMP-FLOOD, UDP-FLOOD, TCP-SYN-FLOOD filter 

 

Ignores Ping packets from WAN or LAN ports 

 

Supports firmware upgrade 

 

Supports Remote and Web management 

 

Detachable reverse SMA connector antenna 

The front panel of the DN-7039-A consists of several LED indicators, which is designed 
to indicate connections. Viewed from left to right. Table 2-1 describes the LEDs on the 
front panel of the router.   

 

 

 

 

 

 

       Figure 2-1: Front Panel sketch 

 

Name Action 

Description 

Not lit 

No Power 

Power 

Lit up 

Power on 

Lit up 

The router is initialising 

Flashing 

The router is working properly 

System 

Not lit 

The router has a hardware error 

Not lit 

There is no device linked to the corresponding port 

Lit up 

There is a device linked to the corresponding port but no 
activity 

Link/Act 

Flashing 

There is an active device linked to the corresponding port 

Not lit 

The Wireless Radio function is disabled 

WLAN 

Flashing 

The Wireless Radio function is enabled 

 

 

        Table 2-1 The LEDs description 

 - 

4 -