Intel D845GEBV2 BLKD845GERG2L-10PK User Manual

118 

 

To access this menu, select Boot on the menu bar and then ATAPI CD-ROM Drives. 

 

Maintenance 

Main 

Advanced 

Security 

Power 

Exit 

 

Boot Device Priority 

 

Hard Disk Drives 

 Removable 

Devices 

 

 

The submenu represented in Table 74 is for setting ATAPI CD-ROM drive priority. 

1

st

 ATAPI CDROM 

(Note)

 

Dependent on installed 
ATAPI CD-ROM drives 

Specifies the boot sequence from the available 
ATAPI CD-ROM drives.  To specify boot sequence: 

1.  Select the boot device with <

↑> or <↓>. 

2.  Press <Enter> to set the selection as the 

intended boot device. 

Note: 

This boot device submenu appears only if at least one boot device of this type is installed.  This list will display up 
to four ATAPI CD-ROM drives, the maximum number of ATAPI CD-ROM drives supported by the BIOS. 

To access this menu, select Exit from the menu bar at the top of the screen. 

 

Maintenance 

Main 

Advanced  Security 

Power 

Boot 

 

The menu represented in Table 75 is for exiting the BIOS Setup program, saving changes, and 
loading and saving defaults. 

Exit Saving Changes 

Exits and saves the changes in CMOS SRAM. 

Exit Discarding Changes  Exits without saving any changes made in the BIOS Setup program.   

Load Optimal Defaults 

Loads the optimal default values for all the Setup options.   

Load Custom Defaults 

Loads the custom defaults for Setup options. 

Save Custom Defaults 

Saves the current values as custom defaults.  Normally, the BIOS reads the 
Setup values from flash memory.  If this memory is corrupted, the BIOS reads the 
custom defaults.  If no custom defaults are set, the BIOS reads the factory 
defaults. 

Discard Changes 

Discards changes without exiting Setup.  The option values present when the 
computer was turned on are used.