Bosch MIC-DCA Data Sheet
1 MIC-WMB
2 MIC-SCA
3 MIC-SPR
Not shown: Mounting hardware.
Mounting Combination for MIC-WMB, MIC-SCA and
MIC-CMB
Example Assembly: MIC-WMB, MIC-SCA, MIC-CMB
1 MIC-WMB
2 MIC-SCA
3 MIC-CMB
Not shown: Mounting hardware.
Mounting Combination for MIC-PMB, MIC-SCA and
MIC-WMB
Example Assembly: MIC-PMB, MIC-SCA, MIC-WMB
1 MIC-PMB
2 MIC-SCA
3 MIC-WMB
Not shown: Mounting hardware.
Corner Mount Bracket
The MIC corner mount bracket (MIC-CMB) is
combined with individual brackets to allow MIC Series
cameras to be mounted on the corners of buildings.
The MIC-CMB is manufactured from stainless steel and
powder coated for maximum corrosion resistance.
Supplied hardware includes:
combined with individual brackets to allow MIC Series
cameras to be mounted on the corners of buildings.
The MIC-CMB is manufactured from stainless steel and
powder coated for maximum corrosion resistance.
Supplied hardware includes:
• four M8 x 25 stainless steel hex bolts
• four M8 stainless steel plain washers
• four M8 stainless steel nuts
• four M8 stainless steel plain washers
• four M8 stainless steel nuts
Wall Mount Bracket
The MIC wall mount bracket (MIC-WMB) allows
mounting on building walls, or with a pole mount
bracket (MIC-PMB) and MIC-SCA to allow mounting on
lamp posts, scaffolding, and other nonstandard
mounting posts. The MIC-WMB is manufactured from
solid aluminum or stainless steel. It provides a 4 in.
pitched circle diameter (PCD) mounting position for
the MIC camera and has a deep bowl to accommodate
the composite cable and connector.
An O-ring provides a watertight seal to protect the
cable connector. Supplied hardware includes:
mounting on building walls, or with a pole mount
bracket (MIC-PMB) and MIC-SCA to allow mounting on
lamp posts, scaffolding, and other nonstandard
mounting posts. The MIC-WMB is manufactured from
solid aluminum or stainless steel. It provides a 4 in.
pitched circle diameter (PCD) mounting position for
the MIC camera and has a deep bowl to accommodate
the composite cable and connector.
An O-ring provides a watertight seal to protect the
cable connector. Supplied hardware includes:
• four M8 x 20 stainless steel hex bolts
• four M8 stainless steel plain washers
• one O-ring, 80 mm x 3 mm
• four M8 stainless steel plain washers
• one O-ring, 80 mm x 3 mm
Spreader Plate
The MIC spreader plate (MIC-SPR) is used to spread
the weight of a MIC Series camera and its supporting
brackets so that the camera can be mounted securely
to flat masonry surfaces. The MIC-SPR is manufactured
from aluminum plate and powder coated to the same
standard as the MIC Series cameras. An unpainted
stainless steel version is also available.
Supplied hardware includes:
the weight of a MIC Series camera and its supporting
brackets so that the camera can be mounted securely
to flat masonry surfaces. The MIC-SPR is manufactured
from aluminum plate and powder coated to the same
standard as the MIC Series cameras. An unpainted
stainless steel version is also available.
Supplied hardware includes:
• four M8 x 30 stainless steel cap head bolts
• four M8 stainless steel plain washers
• four M8 stainless steel nuts
• four M8 stainless steel plain washers
• four M8 stainless steel nuts
Deep Conduit Adapter
The MIC deep conduit adapter (MIC-DCA) is designed
to allow a weatherproof conduit to be fitted to protect
the MIC composite cable. The MIC-DCA is machined
from solid aluminum and provides a 4-in. pitched circle
diameter (PCD) mounting position for the MIC camera.
An O-ring provides a watertight seal to protect the
electrical connectors on the camera base and the
composite cable connector. The MIC-DCA has two
M25 holes for conduit or cable glands to be fitted, one
in the base and one side entry.
Supplied hardware includes:
to allow a weatherproof conduit to be fitted to protect
the MIC composite cable. The MIC-DCA is machined
from solid aluminum and provides a 4-in. pitched circle
diameter (PCD) mounting position for the MIC camera.
An O-ring provides a watertight seal to protect the
electrical connectors on the camera base and the
composite cable connector. The MIC-DCA has two
M25 holes for conduit or cable glands to be fitted, one
in the base and one side entry.
Supplied hardware includes:
• four M8 x 20 stainless steel hex bolts
• four M8 stainless steel plain washers
• one end cap M25 x 1.5, with O-ring
• one O-ring, 80 mm x 3 mm
• four M8 stainless steel plain washers
• one end cap M25 x 1.5, with O-ring
• one O-ring, 80 mm x 3 mm
Shallow Conduit Adapter
The MIC shallow conduit adapter (MIC-SCA) is used as
required with other mounting brackets. The MIC-SCA
has a single 25 mm side entry conduit fitting hole.
There is not sufficient room inside to allow the camera
to be mounted to it directly. (Use a MIC-DCA instead.)
The MIC-SCA is machined from solid aluminum or
stainless steel, and provides a 4-in. pitched circle
diameter (PCD) mounting position. An O-ring provides
a watertight seal to protect the composite cable.
Supplied hardware includes:
required with other mounting brackets. The MIC-SCA
has a single 25 mm side entry conduit fitting hole.
There is not sufficient room inside to allow the camera
to be mounted to it directly. (Use a MIC-DCA instead.)
The MIC-SCA is machined from solid aluminum or
stainless steel, and provides a 4-in. pitched circle
diameter (PCD) mounting position. An O-ring provides
a watertight seal to protect the composite cable.
Supplied hardware includes:
• four M8 x 20 stainless steel hex bolts
2 | MIC Series Mounting Brackets and Other Accessories