Bosch MIC-DCA Data Sheet

• four M8 stainless steel plain washers
• one end cap M25 x 1.5, with O-ring
• one O-ring, 80 mm x 3 mm

The MIC pole mount bracket (MIC-PMB) is designed to
work with a shallow conduit adapter (MIC-SCA) and a
wall mount bracket (MIC-WMB) to allow MIC Series
cameras to be mounted on lamp posts, scaffolding,
and other nonstandard mounting posts with a wide
range of diameters. The MIC-PMB is machined from
clear anodized aluminum.
Supplied hardware includes:

• four M8 x 30 stainless steel cap head bolts
• six M6 x 20 stainless steel countersunk head bolts
• two high-torque stainless steel worm drive clips

(banding straps), 1 m long

• two pole mount blocks
• mounting plate

The MIC440 Sunshield is a two-part molding designed
to provide additional protection against direct solar
radiation by reflecting solar exposure, and creating an
insulating gap between the environment and the
surface of the camera. Supplied hardware includes:

• four (4) M6 x 12 stainless steel socket head screws

The MIC Sunshield for thermal cameras is a two-part
molding, designed to provide additional protection
against direct solar radiation, particularly in sunny
climates.
Supplied hardware includes:

• eight 25 mm knurled stand-offs, M4 x 12 (external),

M3 x 15 (internal) for MIC612)

• eight 28 mm smooth stand-offs, M4 x 12 (external),

M3 x 15 (internal) (for MIC412)

• eight M3 x 10 stainless steel hex bolts
• eight M3 stainless steel plain washers

The MIC Series USB to RS-485 signal converter is a
compact unit that communicates from a PC’s USB port
directly to MIC Series cameras via the telemetry
connector in MIC Series power supplies. The converter
allows connection between MIC cameras and either
Bosch’s Configuration Tool for Imaging Devices
(CTFID) software (MIC550, MIC550IR, MIC612) or
Bosch Universal Camera Setup Software (“Cam-set”)
(MIC models 400AL, 400IR, 400ST, 412, 440, and
500). Each software application provides full control
of all camera setup and operation functions. The
converter is an available accessory for Models MIC550,
MIC550IR, MIC612, and later; CTFID is available for
download from www.boschsecurity.com. The
converter and CamSet software are supplied with
MIC440 and MIC400ST.

The MIC Biphase converter cards allow up to eight
MIC Series cameras to be interfaced with Bosch
Biphase compatible equipment. The card translates

Bosch Biphase protocol to RS485, half duplex
telemetry signals. It also allows the camera address to
be set through its integrated DIP switch selector.
The MIC-BP3 has its own enclosure with its own power
supply, which enables it to be used by MIC Series
power supplies that do not have an available
expansion slot.
The MIC-BP4 is a plug-in card that fits into an available
expansion slot within a non-infrared MIC Series power
supply unit.

The 8 Input Alarm Card (MIC-ALM) is designed to work
with a MIC Series power supply with a free expansion
slot. The MIC-ALM provides MIC Series cameras with
eight alarm inputs, a washer pump drive function with
test/pump priming capability and two additional
relays, which can be configured to operate external
equipment when an alarm signal is received. The card
is compatible with non-infrared MIC Series power
supply units. (The card cannot be used with a MIC
Series IR power supply.)

The MIC Series washer kits (MIC-WKT, MIC-WKT-IR)
provide the necessary components to allow
connection of a washer pump and water reservoir tank
(sold separately) to a MIC Series camera, and control
via the camera telemetry. (The washer pump, water
reservoir tank, and tubing are sold separately as Bosch
washer kits (HAC-WAS05-20 and HAC-WAS30-50). For
more information, see the washer kits datasheet for
HSPS and MIC Series.)
Each MIC-WKT kit includes:

• washer pump drive card (MIC-WSH)
• washer jet nozzle
• two (2) mounting brackets for the washer jet nozzle

Each MIC-WKT-IR kit includes:

• washer jet nozzle
• two (2) mounting brackets for the washer jet nozzle

Note: The washer pump drive function is built-in to the
MIC Series infrared (IR) power supply units.
The MIC-WSH washer pump drive card fits into an
empty expansion slot of the non-infrared MIC Series
power supply units and provides electrical
connections, a washer pump relay, and a push to test /
pump prime function.

The model MIC-RWB is a pivoting, metal-backed
rubber wiper blade (36 mm x 13 mm x 3.5 mm) for
MIC Series 400 cameras. Models MIC-412-RWAB
(black) and MIC-412-RWAC (silver) are completely
anodized aluminum wiper arms with a fixed long-life
silicone wiper blade and associated hardware.

3 | MIC Series Mounting Brackets and Other Accessories