Gigaset HC450 S30852-H1799-R101 User Manual

Gigaset HC450 / en / A31008-M1799-R101-1-7619 / TFE_Setting.fm / 13.02.2007

Ve

rs

ion 4,

 16

.09.

2005

Once you have installed your HC450 door 

intercom system, you can set up the door 

intercom at your convenience using a 

compatible handset. Before you can do 

this, however, you must register the door 

intercom system with the base station.

Make sure that the control unit is con-

nected to a power supply. If the LED on 

the HC450 control unit is flashing, it 

means that it is not yet connected with 

the base station.
u Set the 4-digit system PIN of your base 

station to "0000" if necessary (refer to 

the manual for your telephone).

u Press the registration/paging key on 

the base station for approx. 3 seconds. 

The registration/paging key is located 

on the right beside the charging cradle.

u Go to the control unit and press the 

pushbutton (see illustration on p. 10) 

there within 20 seconds. The LED on 

the control unit will light up continu-

ously once it has been registered (the 

LED will return to flashing when a call is 

underway between the door intercom 

and base station). If registration does 

not take place despite a number of 

attempts, reduce the distance between 

the base station and control unit (the 

base station can be disconnected from 

the telephone network to do this) and/

or briefly disconnect the control unit 

from the power supply before com-

mencing registration.

u Following successful registration, 

"

" will appear in the list of inter-

nal users. This preset name can be 

changed via the handsets (refer to the 

user guide for the handset).

Call up the menu for the door intercom 

settings. This initial programming step is 

always the same for all functions to be set.

u

Initiate an internal call and 

select the internal user 

"

".

c

Press the talk key.

¨

Press the display key.

~

Enter the 4-digit system PIN of 

the door intercom if the PIN 

has been changed from the 

delivery version (0000) and 

press 

.

You are now in the menu in which you can 

make settings for the door intercom.

You can view the display texts in different 

languages. The languages available 

include English, German, Italian, Dutch 

and French.
Call up the menu for the settings 

(see p. 12):
q

¢

¢

The current setting is displayed.

Change the system PIN of the base station 

once more (refer to the manual for your tele-

phone). This ensures, among other things, 

that only designated handsets can be regis-

tered with the base station.

The menu for changing the display language is 

called up automatically during startup