Gigaset HC450 S30852-H1799-R101 User Manual

Product codes
S30852-H1799-R101
Page of 29
14
Setting up the Gigaset HC450 door intercom system
Gigaset HC450 / en / A31008-M1799-R101-1-7619 / TFE_Setting.fm / 13.02.2007
Ve
rs
ion 4,
 16
.09.
2005
3. "
Light
": You can use the doorbell key to 
control the entry lighting as an alterna-
tive to the "Door Call". The lighting sys-
tem must be connected to the control 
unit for this purpose.
4. "
No Function
".
Call up the menu for the settings 
 
¢
Lower Door Key 
¢
§OK§
The current setting is displayed.
Select the mode for the bottom key: 
"
Second Door Call
", "
Light
" or "
No Function
".
§Save§
Press the display key.
... continue with
a
Press and hold (return to 
idle status).
Proceed as described in the section 
(see p. 13) to set the internal call 
destination and ringer tone. 
The only difference is: In the menu for the 
door intercom settings select the entry 
"
Low. Key Setting
" instead of "
Upper Door 
Key
".
Setting up a call diversion to an 
external number
You can set up the call diversion using the 
following programming steps.
Setting the destination for automatic call 
diversion to an external number
You can divert incoming calls from the 
door intercom to an external number. To 
do this, you must first enter the destina-
tion number.
Call up the menu for the settings 
 
¢
Diversion No.  
¢
§OK§
~
Enter the number (max. 20 
characters) for the external 
call diversion and press 
§OK§
The setting is saved.
a
Press and hold (return to 
idle status).
Activating/deactivating automatic call 
diversion to an external number
You can only activate the "Automatic Call 
Diversion" function if you have previously 
entered a diversion destination 
(see p. 14).
Call up the menu for the settings 
 
¢
Diversion 
¢
§OK§
The current setting is displayed.
r
Activate or deactivate auto-
matic call diversion.
§Save§
Press the display key.
... continue with
a
Press and hold (return to 
idle status).
Caution:
Note that you can very easily activate or deac-
tivate the call diversion from your handset. 
When you are at home, set the door intercom 
to "
Status: Home
". The incoming calls from the 
door intercom will then be sent to your inter-
nal handset. When you are leaving the house, 
set the door intercom to "
Status: Away
". The 
incoming calls will then immediately be routed 
to your external diversion destination. Refer to 
diversion" (p. 18) to find out how to make the 
switch.
The external call diversion destination relates 
only to the top doorbell key.
Caution:
Don't forget the zero for a trunk line if applica-
ble.
If you do not enter a number for the external 
call forwarding, automatic call diversion to an 
external number will be switched off.