Intel i3-4360T CM8064601481958 User Manual

This section describes the ACPI states supported by the processor.

G0/S0

Full On Mode.

G1/S3-Cold

Suspend-to-RAM (STR). Context saved to memory (S3-Hot state is not supported by the

processor).

G1/S4

Suspend-to-Disk (STD). All power lost (except wakeup on PCH).

G2/S5

Soft off. All power lost (except wakeup on PCH). Total reboot.

G3

Mechanical off. All power removed from system.

C0

Active mode, processor executing code.

C1

AutoHALT state.

C1E

AutoHALT state with lowest frequency and voltage operating point.

C3

Execution cores in C3 state flush their L1 instruction cache, L1 data cache, and L2 cache

to the L3 shared cache. Clocks are shut off to each core.

C6

Execution cores in this state save their architectural state before removing core voltage.

C7

Execution cores in this state behave similarly to the C6 state. If all execution cores

request C7 state, L3 cache ways are flushed until it is cleared. If the entire L3 cache is

flushed, voltage will be removed from the L3 cache. Power removal to SA, Cores and L3

will reduce power consumption. C7 may not be available on all SKUs.

Power up

CKE asserted. Active mode.

Pre-charge

Power-down

CKE de-asserted (not self-refresh) with all banks closed.

Active Power-

down

CKE de-asserted (not self-refresh) with minimum one bank active.

Self-Refresh

CKE de-asserted using device self-refresh.

L0

Full on – Active transfer state.

L0s

First Active Power Management low-power state – Low exit latency.

L1

Lowest Active Power Management – Longer exit latency.

L3

Lowest power state (power-off) – Longest exit latency.

Desktop 4th Generation Intel

®

 Core

™

 Processor Family, Desktop Intel

®

 Pentium

®

 Processor Family, and Desktop Intel

®

 Celeron

®

Processor Family

Datasheet – Volume 1 of 2

July 2014

50

Order No.: 328897-009