Intel Pentium D 945 HH80553PG0964MN User Manual

95

The Intel Pentium D processor 900 sequence and the Intel Pentium processor Extreme 

Edition 955, 965 will also be offered as an Intel boxed processor. Intel boxed processors 

are intended for system integrators who build systems from baseboards and standard 

components. The boxed processor will be supplied with a cooling solution. This chapter 

documents baseboard and system requirements for the cooling solution that will be 

supplied with the boxed processor. This chapter is particularly important for OEMs that 

manufacture baseboards for system integrators. Unless otherwise noted, all figures in 

this chapter are dimensioned in millimeters and inches [in brackets]. 

 shows a 

mechanical representation of a boxed processor.

Drawings in this section reflect only the specifications on the Intel boxed processor 

product. These dimensions should not be used as a generic keep-out zone for all 

cooling solutions. It is the system designers’ responsibility to consider their proprietary 

cooling solution when designing to the required keep-out zone on their system 

platforms and chassis. Refer to the Intel

Design Guidelines for further guidance. 

NOTE: The airflow of the fan heatsink is into the center and out of the sides of the fan heatsink.

This section documents the mechanical specifications of the boxed processor. The 

boxed processor will be shipped with an unattached fan heatsink. 

 shows a 

mechanical representation of the boxed processor.