Bixolon SRP-275 SRP-275AG/IFL User Manual

 

 
2-1    Connecting the AC Adaptor 

Before connecting the printer to the power supply, make sure that the voltage and power specifications 
match the printer’s requirements. Using an incorrect power supply can cause serious damage to the printer. 
 
 

Connect the printer to the host ECR (host computer) though an interface cable matching the specification of 
the printer and the host ECR (host computer). Be sure to use a drawer that matches the printer’s 
specification.  
Depending on the interface your system uses, either connect the serial, parallel, USB or Ethernet 
communication cable to the appropriate connector on the back of the printer. Cables are provided by your 
dealer or system installer. 

1) Make sure the printer is turned off. 

2) Before inserting the AC adaptor, connect the 

power cord. 

3) Insert the AC adaptor as shown. 

4) Plug the AC adapter cable into the printer’s 

power connector. 

5) Plug the power cord into the outlet, and turn on 

the power. 

following procedure. 

1) Turn off printer and the host ECR (host 

computer). 

2) Plug the interface cable into the interface 

connector on the printer then fasten the screw 

on both sides of the connector. 

3) Plug the drawer kick-out cable into the drawer 

kick-out connector on the printer. 

(When removing the drawer kick-out cable, 

press on the connector’s clip while pulling out.)