Gigaset DX800A S30853-H3100-D201 User Manual

Gigaset DX800A all in one / IM-NORD EN / A31008-N3100-R201-2-SM19 / settings.fm / 18.04.11

V

e

rsion 4, 16.0

9

.2005

You can set the brightness of the display on 
your base and specify a timeframe during 
which the display is completely deactivated 
e.g., at night. 

If the display backlight is deactivated, it can 
be reactivated by pressing any key or by an 
incoming call. The display backlight is deac-
tivated again after approx. 30 seconds after 
the last press of a key. 
v 

¢

Ï Settings 

¢

¢

The current setting is displayed. 

¤

You can enter data in the following fields:

Prerequisite: The date and time have 
already been set.

Select On or Off.
The following fields are displayed when 
Time Control = On.
Display off from: 
Enter the time in 4-digit format when the 
backlight should be deactivated in idle 
mode. 

Display off until: 
Enter the time in 4-digit format when the 
backlight should be reactivated. 

Set the brightness of the display back-
light with 

r. 

You can select from five brightness levels 
(1 = low – 5 = very bright; e.g., brightness 
level 3 = 

Š). 

¤

Press the display key 

. 

You can set the handsfree volume and the 
receiver volume, as well as the volume of a 
connected wire-bound headset to five dif-
ferent levels. 

v 

¢

ÏSettings 

¢

¢

You will hear a test tone.
r 

Set the receiver volume.

s

Scroll to the Speaker: line.

r 

Set the handsfree volume.

Press the display key to save the 
setting.

You can adjust the volume during a call 
using the 

R and S keys. Each time 

you press the key, the volume will increase or 
decrease by one level. 

Press the display key if neces-
sary to save the setting perma-
nently.