Gigaset DX800A S30853-H3100-D201 User Manual

Gigaset DX800A all in one / IM-NORD EN / A31008-N3100-R201-2-SM19 / PABX.fm / 18.04.11

V

e

rsion 4, 16.0

9

.2005

The keypad function allows you to control 
certain features by entering sequences of 
characters and digits.

The keypad function must be activated 
when you connect your base to an ISDN 
PABX or exchange (e.g., Centrex) that is con-
trolled using keypad protocol. The digits/
characters 0–9, * and # are sent as keypad 
information elements. Please ask your serv-
ice provider about the information and 
codes you can transmit.

You can switch between the Auto. Tone Dial, 
Auto. Keypad and Dial of * and # settings.

Once normal dialling has been activated, 
* and # are not transmitted during dial-
ling and if * and # are entered it is not pos-
sible to switch to the keypad.

Once * or # have been entered, this set-
ting automatically switches signalling 
during dialling to the keypad. This auto-
matic switchover is needed for giving 
commands to the exchange or PABX.

Once Dial of * and # has been activated, 
the * and # characters are transmitted 
during dialling as commands to the 
exchange or PABX.

Regardless of the setting options above, 
after dialling or during a call the phone 
switches automatically to tone dialling 
(DTMF), e.g., for remote control of an 
answering machine.
v 

¢

Ï Settings 

¢

¢

q

Select setting and press 

 

e.g., Auto. Tone Dial (

Ø = on). 

In addition to the permanent settings 
described above, you can also switch tem-
porarily to Auto. Keypad.

The setting only applies to the current exter-
nal call and is automatically deactivated 
after the call is ended.

Depending on whether Auto. Keypad is acti-
vated, you may need to activate or deacti-
vate Auto. Keypad during the call.

Open menu.

Select and press 

 

(

³ = on).