Brinno ATH110 Data Sheet

 

  

   These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1,  

D-92240 Hirschau (www.conrad.com). 

 

 All rights including translation reserved. Reproduction by any method, e.g. photocopy, microfi lming, 
or the capture in electronic data processing systems require the prior written approval by the editor. 
Reprinting, also in part, is prohibited. 

 

 These operating instructions represent the technical status at the time of printing. Changes in         
technology and equipment reserved. 

 

The weather protection housing enables the use of the TLC200 time lapse camera outdoors 
in all weather. Even in a storm, the time lapse camera is well protected, which also enables 
recording at any time of year and at any location. The weather protection housing protects your 
time lapse camera from damage from dirt, rain or sand. 
Any use other than that described above is not permitted and can damage the product. 
This product complies with the applicable national and European regulations.
All names of companies and products are the trademarks of the respective owners. 
All rights reserved.

 

•  For safety and approval (CE) reasons, unauthorised conversion and/or modifi ca-

tion of the product are not permitted.

 

•  Do not expose the product to high temperatures, strong vibrations or heavy 

mechanical loads.

 

•  Handle the product with care; it may be damaged by impacts, blows, or accidental 

falls, even from a low height.

 

•  If you have any doubts about the correct operation, or the safety of the product, 

please consult a specialist.

 

•   This product is not a toy and must be kept out of the reach of children. Only use the 

product out of the reach of children. Small parts of the product could be swallowed.

 

•  Do not leave packaging materials unattended. It may become a dangerous 

plaything for children.

 

•  Also observe any further safety instructions in the individual sections of this 

operating guide.

(1)  Latch closures
(2)  Connection for accessories (remote release, PIR sensor)
(3)  Connection for the Micro-USB cable
(4)  Rubber seal
(5)  "MENU" button
(6)  "TIME" button 
(7)  "OK / START" button
(8)  Storage space for rubber cover for the TLC200 camera

•  Switch on the time of the TLC200 time lapse camera at the "OK / START" knob
•  Point the lens of the time lapse camera directly 

forward 

•   Place the time lapse camera in the weather protection housing and make sure that the water-

proof rubber seal (4) is correctly inserted 

•  Close the fl ap of the weather protection housing and lock the closures (1) above and below 

by hanging the wire bracket on the hook of the fl ap and then pressing the closure downward

  Check again to make sure that the door is closed and watertight

•   Set the time interval for image capture and press the "OK / START" button (7) to start 
•  On the exterior, there is a watertight rubber closure for connecting accessories (remote 

release, PIR sensor) (2) and the Micro-USB cable (3) to the time lapse camera from the 
outside 

•   You can also operate the time lapse camera from outside the weather protection housing with 

the "MENU" (5) and "TIME" (6) buttons

•   On the underside of the weather protection housing, there is a thread for attaching a tripod 

This device is maintenance-free. Only clean the exterior with a soft, dry cloth or a brush.
Never use caustic cleaning agents or chemical solutions, as they could damage the surface 
of the casing.

   Dispose of an unserviceable product in accordance with the relevant statutory 

regulations.

Material of housing ......................................................PC
Material of front lens cut-out ........................................Acrylic
Material of buttons and connection covers ..................Rubber
Water-tightness............................................................IPX 4
Dimensions ..................................................................127 x 90 x 55 mm
Weight .........................................................................118.7 g

We, Conrad Electronic, Klaus-Conrad-Straße 1, 92240 Hirschau, hereby declare that this 
product adheres to the fundamental requirements and the other relevant regulations of 
Directive 1999/5/EC.

  The Declaration of Conformity for this product can be found at www.conrad.com