Ideal Networks Serie 33-960 Cable tester, cable tester 33-960-3 User Manual
Product codes
33-960-3
OTDR
37
6
Testing Fibers
The OTDR offers different test modes:
³
Auto: sets all test parameters, performs tests at the specified
wavelengths, and provides complete results.
wavelengths, and provides complete results.
³
Fault finder: rapidly locates fiber ends and displays length of the fiber
under test. This function is available only with the optional FTTx
software package.
under test. This function is available only with the optional FTTx
software package.
³
Manual (advanced): offers all the tools you need to perform complete
OTDR tests and measurements manually and gives you control over all
test parameters.
OTDR tests and measurements manually and gives you control over all
test parameters.
³
Real time: enables to view sudden changes in the fiber link. In this
mode, trace is refreshed instead of averaged.
mode, trace is refreshed instead of averaged.
You can start a test from any pane by pressing the Auto Test key. The unit
will use the current parameters. You can stop a test by pressing the
Auto Test key one more time.
will use the current parameters. You can stop a test by pressing the
Auto Test key one more time.
Your unit may be equipped with two OTDR ports:
³
OTDR SM port: singlemode port to perform conventional OTDR tests
on dark fibers.
on dark fibers.
³
OTDR MM port (optional): multimode port to perform conventional
OTDR tests on dark fibers.
OTDR tests on dark fibers.
OR
³
OTDR SM Live port (optional): singlemode port with a filtered
wavelength to perform troubleshooting tests on live fibers.
wavelength to perform troubleshooting tests on live fibers.