Ideal Networks Serie 33-960 Cable tester, cable tester 33-960-3 User Manual
Product codes
33-960-3
Managing Test Results
60
IDEAL
Opening Trace Files
Opening Trace Files
You can open a maximum of two files at a time: a main trace and a
reference trace (if the corresponding feature is selected).
reference trace (if the corresponding feature is selected).
Your unit can display traces saved in native (.trc) and Bellcore (.sor)
formats.
formats.
To open trace files:
1. Press Menu, select OTDR, and then press Select.
1. Press Menu, select OTDR, and then press Select.
2. Use the left/right function arrows until you
see Open, then display the pane (F1/F2 key).
3. If you enabled the reference trace feature
(see Setting General OTDR Parameters on
page 23), use the up/down arrows to select
the selection button corresponding to the
desired trace. Press Select to view the
browser.
page 23), use the up/down arrows to select
the selection button corresponding to the
desired trace. Press Select to view the
browser.
Note: If desired, press New Folder to
(for more information,
4. Use the up/down arrows to navigate in the
list. Use the right arrow to open a folder.
Highlight the desired file and press Open
(F1/F2 key).
Highlight the desired file and press Open
(F1/F2 key).
5. If you enabled the reference trace feature,