Ideal Networks Serie 33-960 Cable tester, cable tester 33-960-3 User Manual
Product codes
33-960-3
Maintenance
76
IDEAL
Cleaning UI Connectors
Cleaning UI Connectors
Regular cleaning of UI connectors will help maintain optimum
performance. There is no need to disassemble the unit.
performance. There is no need to disassemble the unit.
To clean UI connectors:
1. Remove the UI from the instrument to expose the connector baseplate
1. Remove the UI from the instrument to expose the connector baseplate
and ferrule.
2. Moisten a 2.5 mm cleaning tip with one drop of isopropyl alcohol
(alcohol may leave traces if used abundantly).
3. Slowly insert the cleaning tip into the UI adapter until it comes out on
the other side (a slow clockwise rotating movement may help).
4. Gently turn the cleaning tip one full turn, then continue to turn as you
withdraw it.
I
MPORTANT
If any damage occurs to internal connectors, the module casing will
have to be opened and a new calibration will be required.
have to be opened and a new calibration will be required.
Push
Turn
Pull
3
4
5