TP-LINK AV500 TL-WPA4226T KIT Leaflet

Extend the Router's Wireless Network

TL-WPA4220 will automatically copy the wireless network name and 
password of the router when Wi-Fi clone is completed. 

For more information about the 
advanced settings, please refer 
to the User Guide.

Q1. How do I use the Pair button to create or join a 
powerline network? 
You can use the Pair button on only two devices at a time.  
A. To create a powerline network
1. Press the Pair button on TL-WPA4220. The Power LED      will 
    blink.
2. Within 2 minutes, press the Pair button on TL-PA4010. The 
    Power LED      will blink.
3. In about 1 minute, all the Powerline LEDs      will turn solid.
B. To join an existing powerline network
1. Press the Pair button on a third powerline device. The Power 
    LED      will blink.
2. Within 2 minutes, press the Pair button on either TL-PA4220 
    or TL-PA4010 you have paired. The Power LED      will blink.
3. In about 1 minute, all the Powerline LEDs      will turn solid.

Q2. How do I reset TL-WPA4220?
With TL-WPA4220 turned on, use a pin to press and hold the 
Reset button for more than 5 seconds.
The Power LED      will be off momentarily before turning solid 
and the Wi-Fi LED      will blink quickly. This indicates that the 
reset process is completed. 

Q3. How do I customize the wireless settings on the web 
management page?
1. Find the utility on the provided CD (for Windows only) or 

download it from our official website. 

2. Open the utility and click ‘Connect‘.
3. Log in to the web management page using the default user
name and password (admin/admin).
4. Configure the SSID and click ‘Save’ on the ‘Wireless>Wireless 

Settings’ page.

5. Configure the password and click ‘Save’ on the ‘Wireless> 

Wireless Security’ page. 

6. Click ‘click here’ at the page bottom to reboot the extender.

Q4. What can I do if my computer can’t access the Internet 
after it is connected to a powerline adapter/extender?
Check the following:
1. Connect your computer to the modem or router to test the 
    Internet connection.
2. Make sure the hardware connection is correct.
3. Make sure the Powerline LEDs light up on all of your 
    adapters/extenders. If not, create or join a powerline network 
    by referring to FAQ-Q1.
4. Make sure your computer is set to ‘Obtain an IP address 
    automatically’. 
If your computer still can’t access the Internet after following   
these steps, please contact our technical support.

AV500 

TL-WPA4220

TL-WPA4220

Blink quickly in 
about 15 seconds.

• Blink every second after pressing the 
  Wi-Fi Clone button.
• Blink quickly within 1 minute when 
  Wi-Fi Clone is completed.

AV500 

TL-PA4010

TL-WPA4220

TL-WPA4220

AV500 

Additional 
Device

AV500 

AV500 

Installation is completed when all 
the Powerline LEDs turn solid.

1. Make sure the additional devices use factory default settings. If not, 

    please reset them.
2. If the additional devices have Wi-Fi Clone function, follow step 

 and 

 of Method 2 to install them. If not, skip this.

3. Plug them into the outlets and wait about 1 minute until their 
    Powerline LEDs turn solid.

If the Powerline LEDs do not turn solid, please follow the instructions in 
FAQ->Q1: 
1. For the two devices connected before, use the Pair Button to create a 
    powerline network (Q1->A). (Skip this step if you have already done this.)
2. For additional devices, use the Pair Button to join the existing powerline 
    network (Q1->B).

AV500 

AV500 

All the Powerline LEDs will turn 
solid within 1 minute.

If the Powerline LEDs don’t turn solid, reset all the powerline devices, or create 
a powerline network by referring to FAQ-Q1.

Use the router’s 

 and password to access the Internet.

TL-WPA4220

TL-WPA4220

AV500 

AV500 

LAN

WAN

TL-PA4010

Internet

Wireless Router 

Wireless Router 

( supporting 

WPS 

)

WPS