TP-LINK AV500 TL-WPA4226T KIT Folheto
Códigos do produto
TL-WPA4226T KIT
FAQ (Frequently Asked Questions)
Method 2: Setup via Wi-Fi Clone
Extend the Router's Wireless Network
TL-WPA4220 will automatically copy the wireless network name and
password of the router when Wi-Fi clone is completed.
password of the router when Wi-Fi clone is completed.
1.
Plug TL-WPA4220 into a wall socket near your
router.
For more information about the
advanced settings, please refer
to the User Guide.
advanced settings, please refer
to the User Guide.
2.
Press the WPS button on your router, and within
1 minute, press the Wi-Fi Clone button on your
TL-WPA4220.
For another TL-WPA4220, follow step 1 and step 2
to complete Wi-Fi Clone.
3.
Connect your devices as follows.
Q1. How do I use the Pair button to create or join a
powerline network?
You can use the Pair button on only two devices at a time.
A. To create a powerline network
1. Press the Pair button on TL-WPA4220. The Power LED will
blink.
2. Within 2 minutes, press the Pair button on TL-PA4010. The
Power LED will blink.
3. In about 1 minute, all the Powerline LEDs will turn solid.
B. To join an existing powerline network
1. Press the Pair button on a third powerline device. The Power
LED will blink.
2. Within 2 minutes, press the Pair button on either TL-PA4220
or TL-PA4010 you have paired. The Power LED will blink.
3. In about 1 minute, all the Powerline LEDs will turn solid.
powerline network?
You can use the Pair button on only two devices at a time.
A. To create a powerline network
1. Press the Pair button on TL-WPA4220. The Power LED will
blink.
2. Within 2 minutes, press the Pair button on TL-PA4010. The
Power LED will blink.
3. In about 1 minute, all the Powerline LEDs will turn solid.
B. To join an existing powerline network
1. Press the Pair button on a third powerline device. The Power
LED will blink.
2. Within 2 minutes, press the Pair button on either TL-PA4220
or TL-PA4010 you have paired. The Power LED will blink.
3. In about 1 minute, all the Powerline LEDs will turn solid.
Q2. How do I reset TL-WPA4220?
With TL-WPA4220 turned on, use a pin to press and hold the
Reset button for more than 5 seconds.
The Power LED will be off momentarily before turning solid
and the Wi-Fi LED will blink quickly. This indicates that the
reset process is completed.
With TL-WPA4220 turned on, use a pin to press and hold the
Reset button for more than 5 seconds.
The Power LED will be off momentarily before turning solid
and the Wi-Fi LED will blink quickly. This indicates that the
reset process is completed.
Q3. How do I customize the wireless settings on the web
management page?
1. Find the utility on the provided CD (for Windows only) or
management page?
1. Find the utility on the provided CD (for Windows only) or
download it from our official website.
2. Open the utility and click ‘Connect‘.
3. Log in to the web management page using the default user
name and password (admin/admin).
4. Configure the SSID and click ‘Save’ on the ‘Wireless>Wireless
3. Log in to the web management page using the default user
name and password (admin/admin).
4. Configure the SSID and click ‘Save’ on the ‘Wireless>Wireless
Settings’ page.
5. Configure the password and click ‘Save’ on the ‘Wireless>
Wireless Security’ page.
6. Click ‘click here’ at the page bottom to reboot the extender.
Q4. What can I do if my computer can’t access the Internet
after it is connected to a powerline adapter/extender?
Check the following:
1. Connect your computer to the modem or router to test the
Internet connection.
2. Make sure the hardware connection is correct.
3. Make sure the Powerline LEDs light up on all of your
adapters/extenders. If not, create or join a powerline network
by referring to FAQ-Q1.
4. Make sure your computer is set to ‘Obtain an IP address
automatically’.
If your computer still can’t access the Internet after following
these steps, please contact our technical support.
after it is connected to a powerline adapter/extender?
Check the following:
1. Connect your computer to the modem or router to test the
Internet connection.
2. Make sure the hardware connection is correct.
3. Make sure the Powerline LEDs light up on all of your
adapters/extenders. If not, create or join a powerline network
by referring to FAQ-Q1.
4. Make sure your computer is set to ‘Obtain an IP address
automatically’.
If your computer still can’t access the Internet after following
these steps, please contact our technical support.
AV500
TL-WPA4220
TL-WPA4220
Blink quickly in
about 15 seconds.
about 15 seconds.
• Blink every second after pressing the
Wi-Fi Clone button.
• Blink quickly within 1 minute when
Wi-Fi Clone is completed.
Wi-Fi Clone button.
• Blink quickly within 1 minute when
Wi-Fi Clone is completed.
AV500
TL-PA4010
TL-WPA4220
TL-WPA4220
AV500
Additional
Device
Device
AV500
AV500
Installation is completed when all
the Powerline LEDs turn solid.
the Powerline LEDs turn solid.
1. Make sure the additional devices use factory default settings. If not,
please reset them.
2. If the additional devices have Wi-Fi Clone function, follow step
2. If the additional devices have Wi-Fi Clone function, follow step
1
and
2
of Method 2 to install them. If not, skip this.
3. Plug them into the outlets and wait about 1 minute until their
Powerline LEDs turn solid.
Powerline LEDs turn solid.
If the Powerline LEDs do not turn solid, please follow the instructions in
FAQ->Q1:
1. For the two devices connected before, use the Pair Button to create a
powerline network (Q1->A). (Skip this step if you have already done this.)
2. For additional devices, use the Pair Button to join the existing powerline
network (Q1->B).
FAQ->Q1:
1. For the two devices connected before, use the Pair Button to create a
powerline network (Q1->A). (Skip this step if you have already done this.)
2. For additional devices, use the Pair Button to join the existing powerline
network (Q1->B).
Read this to install additional devices
AV500
AV500
All the Powerline LEDs will turn
solid within 1 minute.
solid within 1 minute.
If the Powerline LEDs don’t turn solid, reset all the powerline devices, or create
a powerline network by referring to FAQ-Q1.
a powerline network by referring to FAQ-Q1.
Enjoy!
Use the router’s
SSID (ABCDE)
and password to access the Internet.
TL-WPA4220
TL-WPA4220
AV500
AV500
SSID:
ABCDE
SSID:
ABCDE
LAN
WAN
TL-PA4010
SSID:
ABCDE
Internet
Wireless Router
Wireless Router
( supporting
WPS
)
WPS