Netgear DUALBAND WLAN WNDAP360 N300 AP WNDAP360-PES User Manual
Product codes
WNDAP360-PES
Installation and Basic Configuration
20
ProSafe Dual Band Wireless-N Access Point WNDAP360
To configure time settings:
1.
Select Configuration > System > Basic > Time. The Time screen displays:
Figure 9.
2.
Specify the fields as explained in the following table:
3.
Click Apply to save your settings.
Table 3. Time System Settings
Field
Description
Time Zone
Select the time zone to match your location.
Current Time
This is a nonconfigurable field that displays the current date and time.
NTP Client
Enable the Network Time Protocol (NTP) client to synchronize the time of the
wireless access point with an NTP server. By default the Enable radio button is
selected.
wireless access point with an NTP server. By default the Enable radio button is
selected.
Use Custom NTP Server
Select this check box to If you want to use a custom NTP server.
Note:
You need to have an Internet connection to use an NTP server that is
not on your local network.
Hostname /
IP Address
IP Address
Enter the host name or IP address of the custom NTP server.
The default is time-b.netgear.com.
The default is time-b.netgear.com.
Note:
If you use a host name, make sure that you have
configured a DNS server. For more information, see the next
section.
section.