Lancom Systems AirLancer USB-300agn LS61318 User Manual

AirLancer USB-54pro – AirLancer USB-300 – AirLancer PCI-54pro

쮿

4

햲

Plug the AirLancer USB-54pro or AirLancer USB-300 into a free USB
interface while your PC is running. 



The USB cable supplied allows you to position the AirLancer USB-
54pro or AirLancer USB-300 further away from your PC so that you
can optimize the wireless signal.

햳

After detecting the hardware, Windows starts the driver installation
automatically. Interrupt this procedure if you wish to carry out the
installation with the Setup Wizard on the supplied CD.

햴

Place the supplied CD into your drive. The Setup Wizard will start
automatically.



If the setup does not start automatically, run AUTORUN.EXE in the
root directory of the supplied CD.

햵

With the Setup Wizard, you first select the entry "AirLancer software",
then the entry for your product. Follow the setup program's instructions.

햲

Switch the PC off.

햳

Briefly touch the computer housing to discharge any static electricity.
Next, disconnect the AC power supply cable from the rear of the PC
housing.

햴

Remove all retaining screws or release the catches for the PC housing and
remove the cover.

햵

A free PCI slot is required for the installation of the AirLancer PCI-54pro.
Before installing the card, remove the blind bracket for the slot you intend
to use.