Lancom Systems AirLancer USB-300agn LS61318 User Manual

AirLancer USB-54pro – AirLancer USB-300 – AirLancer PCI-54pro

쮿

5



If your computer is equipped with an AGP graphics board, avoid
installing the network adapter in the PCI slot immediately next to the
graphics board if possible. This may lead to an interrupt conflict
between the network adapter and the AGP graphics board.

햶

Unscrew the external antenna from the PCI card.

햷

Carefully insert the AirLancer PCI-54pro into the free slot. Ensure that the
card is correctly seated in its slot and tighten the screw of the mounting
plate.

햸

Replace the computer case and screw it tight.

햹

Screw the external antenna back on to the antenna connector of the
AirLancer PCI-54pro.

햺

Switch the PC on. After detecting the hardware, Windows starts the driver
installation automatically. Interrupt this procedure if you wish to carry out
the installation with the Setup Wizard on the supplied CD.

햻

Place the supplied CD into your drive. The Setup Wizard will start
automatically.



If the setup does not start automatically, run AUTORUN.EXE in the
root directory of the supplied CD.

햽

With the Setup Wizard, you first select the entry "AirLancer software",
then the entry for your product. Follow the setup program's instructions.

Depending on the PC's operating system, there is a choice of methods for
configuring the AirLancer adapters. Either the configuration software

PCI slot