TP-LINK AV500 TL-PA4030KIT User Manual

 

16

 

You can change the name of the remote adapter to an easy-to-remember one. Additionally, you 
can select the desired adapter and enter its password (Take note of the password format) so as to 
set the network name of this device on System configuration homepage. To change the name of 
the remote adapter or enter its password, please follow the steps below: 

(1)  Select the desired device and click the Modify button to display the following dialog. 

 

(2)  Enter a new name for the selected adapter and enter its password (Take note of the password 

format). The password can be found on the back of adapter.   

(3) Click the Save button to make the settings effective. 

)

 

Note: 

 

Password is unnecessary to enter for renaming. 

You can add a remote Powerline Adapter to your network that is not in the displayed list. You are 
suggested to locate the passwords for all Powerline Adapters you wish to manage and add them 
to the local logical network by clicking the Add button.   

Click the Add button to display the following dialog box. This dialog box allows you to enter both 
the selected device’s name and password. Note that the Powerline Adapter must be present on 
the power grid in order to activate the set password and be added to the local network.       

Enter your Device Name and Password (Take note of the password format) and click the Save 
button after setup.