TP-LINK TL-WR1043ND TL-WR1043ND(DE) User Manual

 

-22- 



 

1)  The WPS LED on the router will light green for five minutes if the device has been 

successfully added to the network. 

2)  The WPS function cannot be configured if the Wireless Function of the router is disabled. 

Please make sure the Wireless Function is enabled before configuring the WPS. 

 

Figure 4-6  the Network menu 

There are three submenus under the Network menu (shown in

 Figure 4-6

): WAN, LAN and MAC 

Clone. Click any of them, and you will be able to configure the corresponding function.   

Choose menu “Network→WAN”, and then you can configure the IP parameters of the WAN on 

the screen below. 

1.  If your ISP provides the DHCP service, please choose Dynamic IP type, and the router will 

automatically get IP parameters from your ISP. You can see the page as follows (Figure 4-7): 

 

Figure 4-7    WAN - Dynamic IP