Rigol DS2202A 2-channel oscilloscope, Digital Storage oscilloscope, DS2202A User Manual
Product codes
DS2202A
RIGOL
DS2000A User’s Guide
7-14
available is from 4 to 32.
4. Endian Setting
Press Endian to select “LSB” or “MSB” and the default is “MSB”.
5. Display-related Setting
Press Format to set the display format of the bus to Hex, Decimal, Binary or
ASCII.
Press Offset and use
ASCII.
Press Offset and use
to adjust the vertical display position of the bus.
Press BusStatus to turn the bus display on or off.
6. Decoding Table
The decoding table displays the decoded data, the corresponding line number,
time and error information on the data line in table format. It can be used to
observe relatively longer decoded data to solve the problem that some data
could not be seen clearly on the screen.
Press Event Table Event Table to select “ON” (note that this operation is
only available when BusStatus is set to “ON”) to enter the decoding table
interface as shown in the figure below. If a USB storage device is currently
connected to the instrument, press Export to export the data table to the
external USB storage device in CSV format.
time and error information on the data line in table format. It can be used to
observe relatively longer decoded data to solve the problem that some data
could not be seen clearly on the screen.
Press Event Table Event Table to select “ON” (note that this operation is
only available when BusStatus is set to “ON”) to enter the decoding table
interface as shown in the figure below. If a USB storage device is currently
connected to the instrument, press Export to export the data table to the
external USB storage device in CSV format.