Janitza UMG 96RM-M 5222039 Data Sheet

41

Fig. Password request
If a password was set, 
it can be entered using 
buttons 1 and 2.

Fig. Current transformer 
programming mode
The primary and 
secondary currents can 
be changed using buttons 
1 and 2 (cf. page 39).

Fig. Programming mode
Voltage transformer
The primary and 
secondary currents can 
be changed using buttons 
1 and 2 (cf. page 40).

Switching to programming mode
•  Switch to the programming mode as described. The 

symbols for the programming mode (PRG) and for the 
current transformer (CT) appear. 

•  Use button 2 to switch to the voltage transformer 

setting. The first parameter of the parameter list 
is shown by repeatedly pressing button 2.

Changing parameters
•  Confirm the selection with button 1.
•  The most recently selected address is displayed with 

the associated value.

•  The first digit of the address flashes and can be 

changed using button 2. Button 1 provides a selection 
of digits that, in turn, can be changed with button 2.

Changing the value
•  Once the desired address is set, a digit of the value 

is selected with button 1 and changed with button 2.

Leaving programming mode
•  Simultaneously press buttons 1 and 2 to exit the 

programming mode.

Fig. Programming mode
Parameter display
The individual parameters 
can be changed 
using buttons 1 and 2 
(cf. page 36).