Janitza UMG 96RM-M 5222039 Data Sheet

6

The proper and safe operation of this device 
requires appropriate transport, proper storage, 
installation and assembly as well as careful operation 
and  aintenance. When it is assumed that safe operation 
is no longer possible, the device must immediately be 
taken out of operation and secured against accidental 
start-up.
Unpacking and packing must be carried out with 
the usual care, without the use of force and only with 
the use of suitable tools. The devices must be visually 
inspected for proper mechanical condition. 
It can be assumed that safe operation is no longer 
possible if the device, e.g.

•  shows visible damage, 
•  does not work despite intact power supply,
•  and was exposed to unfavourable conditions 

(e.g. storage outside of the permissible climatic 
limits without adaptation to the ambient climate, 
condensation, etc.) or transport stresses (e.g. falling 
from a great height even without exterior visible 
damage, etc.) for prolonged periods.

•  Please check that the delivery is complete before you 

begin with installation of the device.

C

All supplied screw terminals are 
attached to the device.

These operating instructions are part of the product.
•  Read the operating instructions prior to using 

the device.

•  Keep the operating instructions at hand throughout 

the entire service life of the product and keep ready 
for referencing.

•  Hand over the operating instructions to each 

subsequent owner or user of the product.