Rigol DS1104Z-S 4-channel oscilloscope, Digital Storage oscilloscope, DS1104Z-S User Manual
Product codes
DS1104Z-S
RIGOL
DS1000Z User’s Guide
5-11
When the Pulse Condition is set to
,
,
or
, press
Setting and use
to input the desired value. The range available is from 8 ns
to 10 s.
When the Pulse Condition is set to
or
, press Upper Limit and
Lower Limit and use
to input the desired values respectively. The range of
the upper limit is from 16 ns to 10 s. The range of the lower limit is from 8 ns to
9.99 s. Note that the lower limit of the pulse width must be lower than the upper
limit.
9.99 s. Note that the lower limit of the pulse width must be lower than the upper
limit.
Trigger Mode:
) under this trigger type as auto,
normal or single. The corresponding status light of the current trigger mode turns on.
Trigger Setting:
Press Setting to set the trigger parameters (trigger holdoff and noise rejection)
under this trigger type.
Trigger Level:
Use TRIGGER LEVEL to modify the level. For details, please refer to the
Trigger Level:
Use TRIGGER LEVEL to modify the level. For details, please refer to the
description of “
” on page
Trigger level
Positive
pulse width
A
B