Fluke Fluke 4325162 User Manual
Product codes
4325162
Earth/Ground Tester
Setup
13
Table 5. Display Descriptions (cont.)
Function Displays
Condition
Note
edw049.eps
Hardware malfunction
(for example, current
overload).
(for example, current
overload).
Switch ON/OFF if still
faulty.
The symbol may
appear when using the
stakeless
measurement on low
resistance circuits.
faulty.
The symbol may
appear when using the
stakeless
measurement on low
resistance circuits.
edw050.eps
EE PROM memory
access malfunction.
access malfunction.
Contact service.
edw051.eps
Internal computation
malfunction.
malfunction.
edw052.eps
Thermal overload.
Cool thoroughly.
flashes on display
Setup
Batteries
Note
Rechargeable batteries may be used but must be charged outside of the
instrument. The number of measurements available with these cells will
typically be different to those available using alkaline cells.
instrument. The number of measurements available with these cells will
typically be different to those available using alkaline cells.
This Tester is equipped with six 1.5 V batteries IEC LR6 type AA. Replace or recharge
the batteries if the battery indicator shows 1 or 0 bars.
the batteries if the battery indicator shows 1 or 0 bars.
To insert the batteries:
1. Switch off instrument, see Figure 2.
2. Disconnect all test leads.
3. Open battery compartment.
4. Insert batteries. Always replace the complete set of batteries.
5. Close battery compartment.
1. Switch off instrument, see Figure 2.
2. Disconnect all test leads.
3. Open battery compartment.
4. Insert batteries. Always replace the complete set of batteries.
5. Close battery compartment.