Fluke 805 VIBRATION METER 4094385 User Manual

16 

3. Push 

F to input the character into the field. 

4.  Repeat steps 2 and 3 for additional characters. 

5. Push 

S to store the value in the Meter and exit 

the menu. 

6. Push 

N to start data collection. 

The Meter automatically detects when you disconnect the 
external sensor and is set to measure with the internal 
sensor. 

The Meter has an audio connector for headphones. 
Headphones are useful for detection of unusual machine 
sounds. 

To listen to a machine: 

1.  Open the connector cap of the Meter and connect 

the audio connector. 

2.  Put on the headphones. 

3.  Push and continue to hold N. 

4.  Push the sensor tip onto the test surface.  

As you continue to hold N and Meter position 
with a consistent force, the audio channel is 
active. The Meter also takes a measurement at 
this time. 

Figure 4 shows how to make the audio connection to the 
Meter. 

 

gqi04.eps