Voltcraft LT-100Tester LT-100 Data Sheet

“For more than 25 years, our product range has been dynamically adapting to the constant changes in the industry. We 

commit to offering first-class quality to our customers while delivering an excellent cost-performance ratio. This philosophy 

remains the cornerstone of Voltcraft’s success.”

Handy lamp tester for current gas filled low and high pres-

sure lamps. Testing  ceiling lamps in the socket without a 

ladder is also possible using the telescopic antenna. 
In addition a continuity tester enables the testing of the 

heating coil. An LED torch is integrated for badly lit areas.

For neon, energy saving, fluorescent, mercury vapor and 

sodium discharge lamps // continuity tester for filament 

test // integrated LED torch // telescopic antenna 68 cm //

Single handed operation possible // extremely compact 

// integrated telescopic antenna extendable up to 68 cm 

// compatible with all fluorescent (electro luminescence) 

lamps up to 100 W: T2, T4, T5, T8, T9, T10, T12, energy 

saving fluorescent lamps, sodium discharge-low pres-

sure lamps, sodium discharge-high pressure lamps, neon 

tubes, mercury vapor lamps // integrated LED torches // 

optical/acoustic display.

Batteries // Instruction Manual.

These operating instructions are a publication by Conrad Electronic SE, Klaus-Conrad-Str. 1, D-92240 Hirschau (www.conrad.com). 
 All  rights  including  translation  reserved.  Reproduction  by  any  method,  e.g.  photocopy,  microfilming,  or  the  capture  in  

electronic data processing systems require the prior written approval by the editor. Reprinting, also in part, is prohibited. 
 These operating instructions represent the technical status at the time of printing.  
© Copyright 2014 by Conrad Electronic sE 

G

Test interval "TEST"

approx. 1 second

Test voltage

max. 3000 V/AC, 68 kHz - 72 kHz

Telescopic antenna length

approx. 68 cm

Heating coil test

T2, T4, T5, T8, T9, T10, T12

Automatic power-off

5 minutes

Power supply

4 Micro batteries (AAA)

Power input

approximately  400 mA (Impulse)

Operating conditions

0 to 40°C (<75%rF non condensing)

Storage conditions

-10 to +50°C (<75%rF non condensing)

Operating altitude

max. 2000 m

Battery change alarm

<4,5 V, acoustic

Alarm signal

>70 dB

Weight

approx. 226 g

Dimensions (LxWxH)

220 x 55 x 30 (mm)

Measuring category

CAT III 300 V

Contamination level 

2