Gigaset E45 S30852-H1751-R203 User Manual

Gigaset E45 / English / A31008-M1751-R201-1-SM19 / start_guide_time.fm / 04.08.2005

¤

Hold the battery cover at a slight angle 

and introduce the two lower lugs into 

the casing first. Then close the cover so 

that it clicks into place.

Insert the catches on the lock ring or belt 

clip into the notches in the casing and 

make sure that the arrow markings on the 

casing are aligned with those on the bot-

tom of the ring. Turn the lock ring or belt 

clip clockwise to the end stop. When both 

holes are horizontally aligned with the 

upper edge of the handset the lock ring is 

closed. 

Position both thumbs on the lock ring and 

at the same time turn the lock ring or belt 

clip anticlockwise and remove.

¤

Insert a coin into the cavity at the top of 

the battery cover and twist it until the 

cover opens.

Before you can use your Gigaset E45 you 

must register it to a base station. It can be 

registered to a maximum of four base sta-

tions. The actual registration procedure 

will depend on the type of base station. 

Important: The handset must not already 

be registered to any base station. 
Registering the handset to the Gigaset 

E450 base station occurs automatically. 

(On the E455 base station you register 

your handset manually, see page 6.)

¤

Place the handset in the base with its 

display facing forward.

Registration takes around 1 minute. Dur-

ing this process, 

 appears 

in the display and the name of the base 

station flashes e.g. 

. When the 

handset has registered, its screen displays 

its internal number, e.g. 

for internal 

number 2. The handset is assigned the 

lowest available internal number (1-6). If 

all internal numbers 1-6 have been 

assigned, number 6 is overwritten, pro-

vided the handset with the internal 

number 6 is in idle status.