Becker professional.5 LMU 1501870000 User Manual

>>>

GENERAL OPERATION

Connecting to power supply
Connection to the public mains grid is
achieved using the optionally available
mains power supply unit. Please
proceed as follows to connect to the
mains:
> Hold the connector and push it all the

way into the connecting socket in the
Navigation device without using
excessive force.

> Insert the plug of the power supply unit

into the socket.

The supplied TMC antenna is integrated
into the cable for power supply.
The TMC antenna runs in parallel with
the the cigarette lighter cable in the
delivered condition. 
If the TMC reception is poor, you must
remove the cable of the TMC antenna
from the cable for the cigarette lighter. 
(Model dependent, the cable cannot be
disconnected on navigation devices with
magnetic holders)

The GPS antenna is integrated into the
housing.

¤

Make sure that your hands are not wet
and that the power supply unit is dry.
Only connect the power supply unit to
a permissible mains power supply.

Note:

Remove the power supply unit when
not using the Navigation device for
longer periods of time.

Note:

The TMC antenna must be installed in
such a way that it does not distract you
while driving.

Note:

The integrated GPS antenna is not
suitable for use in vehicles with anti-
glare windows (metalised thermo-
glass or metal foil, indicated by the
window label - SIGLA SOL, SIGLA
CHROM, SIGLA, KOOL-OF, SUNGATE,
etc.) and vehicles with fine-meshed
heating wires in the windows.