Becker professional.5 LMU 1501870000 User Manual

>>>

GENERAL OPERATION

> Remove the memory card from its

packaging without touching or soiling
the contact bar.

> Hold the memory card so that the

contact strip is facing towards the rear
of the unit.

> Guide the memory card into the card

slot.

> Exert a little pressure and slide the

memory card into the card slot until it
snaps in.

The card slot ejects the card so that you
can pull it out with two fingers.
> Use your finger to gently press the

memory card against the spring force
into the card slot and then release it.

The card is ejected.
> Remove the memory card and place it

in the packaging while ensuring not to
touch contact bar.

The Navigation device can be attached
directly to the windscreen with the unit
holder.

Note:

The Navigation device and unit bracket
must not be exposed to long periods of
direct sunlight. Temperatures inside the
vehicle of +70 °C and higher may
damage parts of the bracket.

Note:

Fasten the unit holder such that your
field of vision is not impaired when the
Navigation device is installed and
ensure that the unit is outside the
deployment area of the airbag. 
Ensure that the electrical connection
cable does not hamper you from
accessing the vehicle's controls.
Clean the attachment surface on the
windscreen to ensure that it is clean and
free of grease. Do not use greasy or
soapy cleaning agents.