Praktica Digital camera 16 MPix Optical zoom: 24 x Black 256117 User Manual

Product codes

256117

Use the AV cable that comes with the camera to connect it to the TV.

• Make sure that you insert the cable connector into the

USB/AV port until you feel it click securely into place.
Failure to insert the connector fully can result in poor
communication or malfunction.

• Note that even while the connector is fully inserted, you

still will be able to see the metal part of the connector as
shown in the illustration.

Turn on the TV and select its video input mode.

If the TV has more than one video input, select the one where the camera is
connected.

Press [

] (PLAY) to turn on the camera.

This will cause an image to appear on the TV screen, without anything appearing
on the camera’s monitor screen.

• You also can change the aspect ratio of the screen and the video output

Now you can display images and play back movies as you normally do.

IMPORTANT!

• Before connecting to a TV to display images, be sure to configure the camera’s

[

] (REC) and [

] (PLAY) buttons for “Power On” or “Power On/Off” (page 88).

• Audio is initially output by the camera at maximum volume. When you first start

displaying images, set the TV volume control at a relatively low level and then
adjust it as required.

Viewing Snapshots and Movies on a TV Screen

Yellow

AV cable (bundled)

[USB/AV] port

White

Making sure that the mark on the AV cable connector is towards the
lens side, connect the cable to the camera.

VIDEO IN jack (yellow)

AUDIO IN jacks (white)

Audio

Video